Causes metallic balance difference, is generally caused by the following factors:
Foring/Casting Steel Shaft
Product introduction:
Shafts are
cylindrical objects worn between bearings or wheels or gears, but some are
square.
Workshop show
Factory Equipments
Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.
Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures
certificates
Contacts
Forging/casting Steel Shaft,Forging Steel Shaft,Casting Steel Shaft,Forging/Casting Rear Shaft Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.hxreducer.com
1) Mechanical loss of metal during ore dressing : The so-called mechanical loss mainly refers to the amount of metal that is not included in the finished concentrate and tailings. Under normal circumstances, this part of the metal loss only accounts for 0.1-0.2% of the recovery rate. , no more than 0.5%.
2) The influence of test error: The influencing factors of such errors are very complicated. From the raw ore into the factory, the various errors are throughout the test.
3) Accumulation of intermediate products: Intermediate products are included in the product and metals that remain in the process. 
Reasons for the difference in metal balance