Automatic Type Oil Distillation Plant
The Waste Engine Oil Distillation Plant is used to refine waste engine oil, crude oil and fuel oil after pyrolysis process into diesel grade oil, gasoline or and base oil. The daily capacity of this plant is about 5-6 tons.
Flow-chat of waste engine oi Distillation Plant
Advantage of waste engine oi distillation plant
1. Unique and original manufacturing and technology with our own formula of our equipments in China;
2. Unique horizontal design, high oil output with about 90% oil yield and 100% conversion rate, highly effective and profitable;
3. Good quality end product oil as the substitution of standard diesel oil in usage;
Automatic submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices;
4. Sync gas recycling system: fully burned after recycling and utilization, saving fuel and preventing pollution;
5. National patent, unique heat insulation shell: high efficiency temperature keeping, excellent energy-saving effect;
6. High condensing efficiency condensers with more oil output. Good quality oil, longer lifetime, and easy to clean;
7. National patent water film smoke scrubbers: efficient removal of the acid gas and dust of the smoke, environmental friendly to meet related national standards.
Technical Parameter of Waste engine Oil Distillation Plant
NO.
Item
Technical Parameter
1
Suitable Raw Materials
Waste engine oil, Pyrolysis fuel oil, crude oil
2
Structure
Horizontal Type
3
Capacity(24 hours)
3.5-6.5Mt
4
Work Pressure
Normal Pressure
5
Oil Yield
80%-90%
6
Power
18 kw/H
7
Cooling Method
Cycle water
8
Condensers
4 pieces of Vertical condensers
9
Emission Treatment
New DE-sulfurization Smoke Scrubbers
10
Heating Method
Hot Air
11
Type of Installation
With Foundation
12
Noise dB(A)
≤85
13
Dimension of Reactor(mm)
Ф2200×6000
Ф2500×8800
14
Operating Mode
Semi-continuous Operation
15
Main Chamber Weight (MT)
10~13Mt
16
Total Weight(MT)
25~35Mt
17
Installation Space Required
35m*15m
18
End Product
Non-standard diesel oil
19
Manpower
1~2/shift
20
Shipment Requirement
2*40HC=Ф2200×6000
1*40HC+1*40FR=Ф2500×8800
Automatic Type Oil Distillation Plant Automatic Type Oil Distillation Plant,Automatic Type Waste Oil Distillation Plant,Used Engine Oil Refining Machine,Automatic Waste Oil Distillation Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
Metal accessories ring, half-ring, triangle ring, 8-ring, crystal word ring, three links, not allowed to welding, the edge into a circular arc. The adjustment ring only allows butt welding. Electrical safety belt definition: protective equipment for high-risk workers to prevent falling injuries. It consists of belts, ropes and metal fittings. Electrician Safety Belts Safety Cord Definition: A tether that protects the body from falling. Electrical Safety Belt Sling Definition: The rope used for the self-locking hook must be pre-attached. Vertical, horizontal and tilt are available. Self-hook on the rope is free to move and can adapt to different work points. Buffer definition: When the human body falls, it can reduce the body's stress and absorb some of the impact energy. Differential speed controller definition: box with a certain length of rope. The rope can be used at any time during work. When falling, self-control is caused by changes in speed. Called speed differential control. Seat belt professional inspection equipment includes ZD-711 seat belt impact tester (overall dynamic load) ZD-716 seat belt overall dynamic load, static load tester ZD-717 seat belt overall slide tester ZD-719 seat belt test rubber dummy ZD-718 belt tension testing machine. These devices basically include seat belt testing items and are fully required by national standards.
Seat belts are our life support. We must pay attention to using the seat belts.
1, can not change the working structure of the seat belt.
2. In the event of a serious collision or rollover, the seat belt must be replaced.
3. If the seat belt is broken, bulged or loosely deformed due to chemical action or sunlight, the seat belt must be replaced.
4, if the seat belt metal connecting parts bent, deformation or rust, seat belts must be replaced.
5, when the use of seat belt performance is not good, the seat belt must be replaced. 
Seat Belt Performance and Considerations
Seat Belt Performance and Precautions Articles from the Technical Department of Qingdao Zhongbang Instrument Co., Ltd. Seat belts are protective articles for high-risk workers to prevent falling injuries. It consists of belts, ropes and metal fittings. According to the national standard GB6095-2009, safety belts are mainly divided into belt-type and suspended belts and ropes must be nylon, vinylon, silk material. Wrapped rope with leather, light leather, vinylon or rubber. The belt must be a full one with a width of 40-50mm and a length of 1300-1600mm. The indicators such as the damage load of seat belts, belts, and metal fittings must be inspected in accordance with the relevant clauses of GB6096-2009 "Safety belt inspection methods." The width of the belt is not less than 80mm and the length is 600~700mm. The belt contacts the waist with a soft material, and the outer layer is wrapped in a webbing or light leather with rounded edges and no corners. The color of the tape is mainly dark green, grass green, orange, dark yellow, followed by white. The safety rope diameter is not less than 13mm. Metal hooks must have a safety device. The surface of the metal fittings is smooth and free of pits and cracks; the edges are rounded; the surface must be rust proof. Accessories that do not meet the above requirements must not be installed.