What maintenance projects have you done for your car? How many kilometers has your car been running now? Many people care for the car are to the 4S shop and then ask the staff, what maintenance needs for their car. Then the 4S shop began to tell you some esoteric maintenance methods that you can't understand. Then send you any maintenance or film. At this time, you still feel very reasonable, but also take advantage of it. If you don't do it, you don't know what kind of maintenance to do. This is actually like you are in the mall, suddenly someone wants to do beauty for you. After you go up, you can do a free recommendation. You are also embarrassed to resign. Finally, the maintenance of your car is still not maintained. Today, Xiaobian tells everyone what the car maintenance project has . 1. Check the body carefully every day and check the signal device. 2. Check the tire pressure every week and check the coolant and electrolyte. 3. Check tire wear every month, clean the compartment, check the mirror, clean and wax. There is no leakage of oil in the spread. 4. Clean the engine every six months, clean the three filter oil, and replace the oil filter. Check the battery line for anything that has been corroded and cleaned its appearance. Tire replacement position, wear of the brake system, such as brake pads, check the amount of brake oil. 4. When the car is driving to 30,000 kilometers, the brake system is usually maintained for 20,000 kilometers, and the engine is cleaned once every 1,500 kilometers. The brake oil is changed over 20,000 kilometers. Do you know what car maintenance projects you have to do now? Car maintenance is very important, maintenance is to extend the life of car parts, but also to ensure the safety of the car. Car maintenance does not have to choose the most expensive, full set, in fact, choose the right one for your own car. Also, don't think that you should do this maintenance because the map is cheap. Of course, people let you take advantage of it, of course, to make you suffer big losses. Some deep maintenance does not have to be done every time, just a few months to do it. Usually do some regular project maintenance engine.
With more than 30 years customers` actual operation
and technology improvement, 1500mm two/three/five layers fully automatic
stretch film machine is mature and cost-effective, some whole production line
adopt melt metering pump technology and high precision pressure sensor system,
which can stably and effective to control the pressure. It will highly improves
film horizontal and vertical`s tension strength and anti-puncture resistance
and make the film meeting the high requirement for machine packing film. The
cooling roller adopts big diameter design and special double-decker runner,
greatly improving the cooling effect of high-speed production to guarantee good
uniformity of cooling roll surface temperature. The film produced by this
machine has good shrinking memory function and self-sticky, which can be widely
used in wrapping of palletized goods. It`s good substitute for hot shrinking
packing film during transportation.
*Related Products:pe casting film machine,pe cling film machine,pe protective film machinery.
Machine Pictures:
Plastic
melt metering pump is more and more important in extrusion process, especially
in high-end products industries, such as high quality sheets, pipes, BOPP,
optical cable.
Installing the melt metering pump in the cast
stretch film unit, which can keep the production constantly and efficiency. The
pump can improve the product quality, stable the production and decrease the
energy consume.
The housing is made of chromium-nickel alloy or
nickel-base alloy, titanium alloy. The gear is made of quenching chromium
steel, other metal materials are also applicable. Bearing is made of graphite
NIAG, zirconium oxide or quench tool steel.
Advantages:
FAST AND STABLE FLOW SUPPLY
Eliminated the extruder`s pulsation wave. Improve
the product quality, decrease the defective rate, and decrease the waste, which
can save 2% material and 25% of the unit power consumption.
STABLE AND EFFICIENCY PRESSURE CONTROL
The melt pump can provide a stable pressure, which
short the discharge time obviously and make the production effectively.
INCREASE THE EXTRUDER OUTPUT AND THE MACHINE LIFE
It has been found that after install the melt pump,
the max pressure wave value is the pressure after pump. Which can make the
inner pressure of the extruder decrease, the melt shear strength decrease, the
temperature curve gently, and restrain the temperature rising. Also the melt
pump can avoid the damage to the extruder from the high pressure.
Produced Films
1500mm stretch film machine unit 1500MM Black Stretch Film Machine Unit,1500MM Hand Stretch Film Machine Unit,1500MM Plastic Stretch Film Machine Unit,1500MM Packaging Stretch Film Machine Unit CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD , https://www.clxmachinery.com
What are the car maintenance items?