The function of the sprinkler not only can clean the dust on both sides of the road and reduce the haze, but also brings the beautifying effect to the surrounding greenery, giving them nourishing and replenishing water and growing healthily. Greening sprinklers are widely used in schools, units, sanitation, greening and other departments. Before the sprinkler works without watering, it is necessary to fill the tank with water and perform the correct operation during the sprinkler work. What should you pay attention to when driving a green sprinkler? 1. Requirements for water When the sprinkler uses the river ditch as a source of water, take care that all the suction pipes do not enter the water. In order to avoid inhalation of rocks, silt, etc., the suction pipe end is generally provided with a filtering device. If the water source is shallow, it is necessary to excavate the water absorption point in advance to ensure that it does not contain impurities. 2. Add water diversion Every time the centrifugal pump absorbs water, a certain amount of water must be added to the pump. After the addition, the water inlet must be closed. 3. The inlet pipe must be vacuumed Inlet pipe system must be sealed and reliable. The hose must not be damaged or cracked, otherwise it will cause air leakage, which can lead to inability to suck up. 4. Parking stalls Whether it is before or after watering, the in-gear must go forward while parking. 5. Winter water release Before the advent of winter, the water in the pumps and pipes should be vented to prevent freezing. 6. Watering precautions: The front nozzle is located at a lower position and close to the ground, and the spray pressure is relatively large, which is used to flush the ground. The rear nozzle is located at a higher position and has a wider spray surface for road construction. When the rear nozzle is used, the front nozzle is closed, and the wider the sprinkler width, the more uniform the sprinkler density. 7. Lubrication and fastening 8. Regular sewage For a period of time, the sewage switch should be opened periodically to remove the impurities from the tank until the water becomes clear. Greening sprinkler trucks are widely used in many fields, and they have also played an important role in the treatment of the environment. As a special special sanitation vehicle, sprinklers have long been supported by a series of preferential policies of the state, plus a variety of uses, so sales in the industry It has been rising without dropping. It has been favored by many companies and many individuals. It is a very popular model. This equipment takes the
power from chassis engine,with stable and environmental performance;It adopts
rotary paddle switch and CCD camera in the inner lifting double-hopper,which
can monitor and alarm the level of aggregates in the hopper to improve the
bearing capacity,stability and reliability.It can realize operation in
height-limit condition,such as bridges and culverts.It adopts camber chip
distributing device to improve the evenness.It uses stable dedicated controller
to control the whole electric system,rear high-definition infrared cameras
monitor the whole operation,which improve the working environment and
efficiency.
Emission standards: Euro V
Chassis motor power: 276kW/380hp
Main Features
Lift Type Synchronous Chip Sealer Lift Type Synchronous Chip Sealer,Synchronous Asphalt Chip,Computerized Synchronous Chip Sealer,Road Synchronous Chip Sealer Henan Gaoyuan Road Maintenance Equipment Co., Ltd. , https://www.sgroadmachinary.com
HGY5317TFC Chip Spreader with asphalt binder is specially designed for asphalt mixing and spreading purposes in road and bridge maintenance projects. Developed from KT0608 and KT0610, this new equipment has something that the previous models fail to offer: it is endowed with stronger processing capability for the tank volume is increased to 8m³ and the volume of hopper grows to 14m³. The bitumen spreading machine is capable of spraying roughly aggregate of 8㎡ without lifting the hopper, which allows the equipment to work in low-height conditions.
HGY5317TFC chip spreading machinery drives stably, sprays material uniformly, and is affordable. A powerful mixing device is available to ensure the rubberized asphalt is not easy to get precipitated or segregated.
Technical Parameters
Model: HGY5317TFC
Chassis model: HOMO ZZ3317N4667E1 from CNHTC
Asphalt spray volume: 0.2-3.0kg/㎡
Aggregate spray volume: 2-22L/㎡
Asphalt heating speed: 20℃/h
Optimum construction speed: 3-6km/h
Chip size: 3-30mm
Tank volume: 8500L
Spray width: 4200mm
Hopper volume: 14m³
Material: modified bitumen, hot asphalt, rubberized asphalt, and emulsified asphalt
Total weight: 31000kg
Dimension: 11950×2500×3860mm (L×W×H)
1. The asphalt sprayer adopts a special chassis which is in conformity with the Euro V standards, featuring strong carrying capability, low oil consumption, and easy operation
2. The patented hydraulic servo technology provides powerful driving force for the system
3. The bitumen spreading machine employs intelligent control system, radar speed tester, monitor, and both automatic and manual operation system. Only one driver is needed to accomplish the distribution job
4. Pipes for carrying bitumen are coated with heat transfer oil to ensure that all of the machine parts run smoothly and don't have to be cleaned
5. The 3 anti-collision foldable sprinkler heads are of high precision and uniformity
6. The imported pump for high-viscosity asphalt meets various working conditions
7. A unique aggregate feeding and distribution system ensures the materials are sprayed uniformly, consecutively and stably
8. Different spray nozzles are controlled independently and can work jointly with each other freely
9. HD camera is equipped at back of the road maintenance vehicle for effective monitor and control
10. The patented bitumen tank with large volume can be heated in a short time and works to maintain the temperature of the materials. Stability of the bitumen is largely improved by the mixing device
Precautions for greening sprinklers