The advantages of mobile patrol online patrol

The traditional patrol inspection methods are mainly conducted by patrolmen conducting regular inspections and irregular inspections at higher levels. The patrollers' patrol inspection methods mainly include manual filling of forms, manual statistics, or use of patrol sticks, single-chip microcomputer inspection devices, etc. . Manual operation is less efficient, and a large number of equipment inputs require higher costs. Moreover, due to the constraints of climatic conditions, environmental factors, personnel quality, and sense of responsibility, the quality of patrols and the in-place rate cannot be guaranteed, resulting in a situation in which confiscations or falsifications can easily occur. In addition, the use of traditional inspection and management methods is difficult to effectively supervise inspection personnel, and the phenomenon of negligence during inspections occurs from time to time.
Cell phone inspection

With the development of wireless communication technology and the popularization and application of smart phones, our mobile phone online inspection system can fully implement patrolling and inspection functions through the mobile phone APP: inspection personnel only need to hold an NFC chip smart phone, brush tour The NFC tag on the checkpoint can complete the information identification. The entire data information collection process is simple, active, timely, and accurate.

The online mobile patrol system has the following 9 advantages over traditional patrol systems:

1. Real-time uploading of text picture location information: The status of patrol points can be transmitted in real time, including text, pictures, voice, etc. The position information of the patrol person can be transmitted and the positioning information can be obtained through GPS.

2. SMS notification: During the specified patrol time period, the patrol personnel failed to promptly sign the patrol. The system can send short messages to the set patrol personnel mobile phones and management personnel mobile phones to facilitate timely management of management personnel.

3. patrol device intelligence: use NFC-enabled mobile phones as patrol tools, while the mobile phone is an essential communication tool for every person, thus allowing users to be more easily accepted;

4. The patrol tag is free from dust, rain, snow, ice and other environmental influences, and can be passively connected without network access and is easy to use. Meet a wide range of outdoor patrol needs.

5. Friendly client interface: The smart Patrol mobile client software has a friendly interactive interface, strong practicality, and user-friendly operation.

6. High flexibility and extensibility: Different patrol plans and personalized patrol schemes can be formulated for different job needs, and the patrol data can be analyzed and handled differently.

7. Prevention of missed monitoring: Flexible patrol plan management. For already patrolled plans, there will be text messages and other reminders when there are missed checks.

8. Reduce costs: Only NFC mobile phones and NFC tags are required, eliminating the need for investment in patrol sticks and related equipment, reducing equipment and maintenance costs. At the same time, cloud server mode is adopted, and no server is required locally.

9. Data inquiries are convenient: You can query the intelligent patrol records and attendance details records for a certain date and time, and facilitate the query and management.

Digital Wise Guoxing’s online patrol management system records the time and location of the patrolling staff in the patrol work, and uploads this data to the platform through the network to facilitate the management of the patrolling personnel and to manage the patrol more scientifically and efficiently. jobs. The mobile phone inspection system has reduced the workload of patrolling operators, improved the efficiency of inspection work and management, greatly improved the accuracy, timeliness and diversity of the data, eliminated the patrol inspection, flowed into the form, and moved away. Observe the phenomenon of flowers.

Description

* Sheel: 
  1. The Maxload Electric Chain Hoist is made of light aluminum alloy shell, light but hard.
  2. With cooling fin, easy and quick Bring the Heat out. 
* Break System: 
  1. Side Magnetic Braking Device, Ensure lock the hoist
  2. Mechanical braker, Dual braking system, much more safety.
* Limit Switch:
  With up & down Limit Switch, to prohibit the Chains from exceeding for safety.
* Chain:
  FEC G80 Chain, Origina imported from Japan. Anti-Rust and Anti-corrosion
* Electromagnetic contactor:
  1. With Schneider Electric (TESSIC), can be used safely under high frequency.
  2. Can be installed Variable-Vrequency Drive (VFD Electric) Can be suitable for Singlle Phase Power supply.
* Inverse phase sequence protecting device:
  It is sepcial electrical installation which controls the circuit not to work in case of wiring error in the power supply.
* Gear:
  The gear made of alloy steel, Through the heat treatment.
* Level of Protection Grade(IP Grade):
  1. Hoist IP Grade: IP54
  2. Push Buttom IP Grade: IP65
* Power supply:
  All kinds of voltage can be custom-made. 200V-660V, 50HZ/60HZ, 1P/3P
* Working Grade:

  M4/1Am



Versatile performance
Two hoist speeds as standard
Versatile adaptability to any task
Simple exchange of the load handling device thanks to quick-change coupling
For right-hand and left-hand operation


Specifications:

Type

Capacity
   (ton)

Standard
Lifting 
Height
(m)

Lifting 
Speed
(m/min)

Lifting Motor

Trolley Motor

I-Beam
(m/m)

Power
(Kw)

Rotation
speed
(r/min)

Phases

Voltage
(v)

Frequency
(Hz/s)

Power
(Kw)

Rotation
speed
(r/min)

Trolley
speed
(m/min)

HHBD00501-2S

0.5

3

6.8

0.75

1440

3

200-600

50

0.4

1440

11/21

58-153

HHBD0101-2S

1

3

6.6

1.5

1440

3

200-600

50

0.4

1440

11/21

58-153

HHBD0102-2S

1

3

3.4

0.75

1440

3

200-600

50

0.4

1440

11/21

58-153

HHBD01501-2S

1.5

3

8.8

3.0

1440

3

200-600

50

0.4

1440

11/21

82-178

HHBD0201-2S

2

3

6.6

3.0

1440

3

200-600

50

0.4

1440

11/21

82-178

HHBD0202-2S

2

3

3.3

1.5

1440

3

200-600

50

0.4

1440

11/21

82-178

HHBD02501-2S

2.5

3

5.4

3.0

1440

3

200-600

50

0.75

1440

11/21

100-178

HHBD0301-2S

3

3

5.4

3.0

1440

3

200-600

50

0.75

1440

11/21

100-178

HHBD0302-2S

3

3

4.4

3.0

1440

3

200-600

50

0.75

1440

11/21

100-178

HHBD0303-2S

3

3

2.2

1.5

1440

3

200-600

50

0.75

1440

11/21

100-178

HHBD0502-2S

5

3

2.7

3.0

1440

3

200-600

50

0.75

1440

11/21

100-178


High operating quality
Convenient single-handed handling and guidance of loads weighing up to 250 kg
Quick-change coupling for a variety of load handling attachments (load hooks, pantograph tongs, clamping and shaft grippers, parallel gripper systems, specifically developed load handling attachments)
Service-friendly thanks to diagnostics interface


High safety and reliability
24 V contactor control
FEM classification from 1Am to 4m
Slipping clutch with speed monitoring
No brake adjustment
No load dropping thanks to slipping clutch arranged in front of the brake
Operating limit switches

Products show:

380V electric chain hoist

double speed electric hoist

electric motor


Long service life
Gearbox, brake and slipping clutch maintenance-free for up to 10 years
Aluminium motor, gearbox and electrical cover parts provided with UV-resistant powder coating
Robust cylindrical-rotor motor with fan and separate brake beneath the electrical cover


Hoist Questions

To send Electric Hoist most competitive price for you, please kindly send me details:
1. What is the lift capacity? 1T? 2T,5T-  
2. What is the lift height? 6m? 9m-

3. Do you need hoist with single lifting speed or double lifting speed
4. Do you need hoist with trolley to move on the beam or without trolley? Single travel speed or double travel speed?
5. What is the voltage?380V, 50Hz, 3 phase? 220V, 60HZ,3phase? Or something else.
6. Will used in Inflammable and explosive gas/ alkali and acid factory?

7. How many hoists do you need?


Our Services

1.Client

We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. People

We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.

3. Product

Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.

4. Performance

We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.

5. Free sample and OEM service

We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.

 







Electric Chain Hoist

Electric Chain Hoist,Electric Chain Fall Hoist,Electric Chain Hoist With Trolley,5Ton Electric Chain Hoist

Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com