2. Guangxi Guiguang, Longguang Talc Industry Company The mining areas of the two companies are located in Longsheng County of Guangxi Province. The mine was built in 1970 and is an important production and export base for the Chinese talc industry. The annual production capacity of Guiguang and Longguang Company is 200,000 tons. (3) Main types and uses of deep-processed products 1. Talc powder Coffee Accessories,Cookie Cutter Mould,Biscuit Cutter Mould,Silicone Biscuit Moulds Wuxi Swif International Trade Co., Ltd. , https://www.swifglobal.com
The talc reserves in this mine are rich in quality and are of first-class and second-class products, belonging to the carbonate type. The ore contains more than 70% talc, the associated mineral is chlorite, and contains a small amount of calcite . After the ore is sprayed with water, it is divided into two grades of +300mm and -300mm by a diagonal grid. +300mm grain level directly to the picking station to pick out the first grade, second grade talc and waste rock; -300mm grain grade through the vibrating screen to screen off -10mm tailings, +10mm grain level on the hand selection station to select one or two Grade talc and waste stone and talc rejects. In addition to talc, the plant uses two 4R and 5R Raymond mills to produce talc, paper talcum powder, medicinal talc and linoleum for linoleum. Manually sorting talc block 99kt/a, original ore size 600~0mm, original ore grade 70%, concentrate yield 93.75%, tailings 0~10mm talc content 5%, water consumption 2t/t ore. The annual output of talcum powder is 55,000 tons, of which the supply of pharmaceutical talcum powder accounts for 70% of the country. In recent years, Guiguang talc company has newly added a new talc ultrafine powder production line (two new products from Longguang Company) to produce three ultrafine powder products of 1,250 mesh, 2,500 mesh and 7 000 mesh (the process flow chart is shown in the figure). 4). The feed size is 325 mesh talc powder, and the main equipment is FJM680 jet mill and WTC315 turbine classifier. The air consumption is 40M 3 /min. The product fineness is 1 250 mesh (d98 is less than or equal to 10 μm), 2500 mesh (d90 is less than or equal to 5 μm), 7000 mesh (d90 is less than or equal to 2 μm), and the production capacity at the time of the table is 545 kg/h, 240 kg/h, respectively. 140kg/h. 
(1) Paper Patent â… , â…¡, â…¢ grade talc extra fine kaolin talc, calcium carbonate, titanium dioxide and other pigments with a control ink, gloss, brightness and opacity of the paper.
(2) Cable I and II talcum powder is used as filler for cables, rubber and plastics to improve the acid and alkali resistance, heat resistance, impact strength, thermal conductivity, tensile strength and creep resistance of plastics and rubber. Electrical insulation properties and improved rubber processing properties.
(3) a ceramic grade â… , â…¡ talc for ceramic ingredients can effectively control the thermal expansion of the ceramic body, as a glaze to provide an inexpensive source of magnesium oxide.
(4) Textile special grade I and II talc Powder Uses low wear and high whiteness of talc as a filling and whitening agent for textiles.
(5) Coatings I and II talc Powder The talc powder is easily dispersed in water and organic matter, and has high chemical inertness and high oil absorption, which can improve the dispersion of the coating.
(6) Pharmaceutical I, II grade talc powder can be used as a filler for cosmetics and as a carrier and additive for medicines and foods.
2. Talc carving products
Engraving arts and crafts with industrial grade I talc blocks or making industrial stone pens.
Ore dressing and processing of talc (2)