Automobile Industry Profile Roll Forming Machine is our main product, include Anti-Collision Beam Machine and Stereo Garage Bottom Plate Machine and Stereo Garage Side Beam Machine.The Automobile Industry Profile Roll Forming Machine can be used for automobile, electric vehicle, agricultural tricycle, etc. The three-dimensional garage equipment is automatic completion of on-line punching and cold bending forming at one time. It has the characteristics of high production efficiency, accurate hole spacing and high degree of automation. This design in line with the use of reliable, easy to maintain, the service life of the parts of utmost standardization, generalization, normalization, saving investment, key parts of a high standard, auxiliary parts use, benchmark roll is easy to swap, the principle of unification.
Automobile Industry Profile Roll Forming Machine Automobile Industry Profile Roll Forming Machine,Stereo Garage Cold Roll Forming Machine,Anti-Collision Beam Production Line,Automotive Anti-Collision Beam Machine Hebei Taigong Roll Forming Machinery Co., Ltd. , http://www.tgrollformingmachine.com
More than 100 roads in Chancheng District of Foshan City replaced 11,000 LED lamps before the Spring Festival. Guangzhou City wants to replace 4507 ç› high-pressure sodium lamps with LED lights. The Lantern Festival in Lanzhou Festival will use LED lights to arrange the LED market before and after the Spring Festival. Scenes. The industry expects that this year is the year of the LED industry's absolute counterattack, the industry will be good enough to break the glasses.
Semiconductor lighting products grabbed the limelight around the Spring Festival. Before the Spring Festival, more than 100 roads in Chancheng District of Foshan City replaced 11,000 LED lamps; Guangzhou City also announced the tender notice for the LED energy-saving renovation project of Guangyuan Expressway Road Street Lighting, which proposed that the Guangyuan Expressway will be 4507 before the Spring Festival.高压 High-pressure sodium lamps with modified conditions are all replaced with LED lights. In fact, in addition to Foshan and Guangzhou, there are more cities in action.
Lantern Festival, nearly a hundred sets of giant Zigong lanterns lighted the East Lake, the first time to try LED and other high-tech elements; 2014 Fuzhou Lantern Festival will also boldly innovate, more use of new materials, new technology, a lot of fashion, novelty, fun The elements, through the arrangement of traditional small lanterns and LED lights, make the light show layer clear and undoubtedly, LED lighting is booming in the Year of the Horse. The reason why, in addition to the unique color of LED lighting, more importantly, all users are interested in the energy-saving and emission reduction effects behind LED lighting.
Energy conservation is the last word. Recently, the reporter learned from the National Semiconductor Lighting Engineering R&D and Industry Alliance (CSA) that since the implementation of the Ten City Wanhao Semiconductor Lighting Application Demonstration Project, 21 pilot cities have used more than 1.6 million LED lamps to save more electricity. At 164 million kWh, these cities have more than 2,000 semiconductor lighting companies with an output value of about 75.9 billion yuan, initially forming an industrial agglomeration. Relevant data show that in 2013, China's semiconductor lighting industry reached 120 billion yuan, an increase of 40 compared with 2009, and the total number of semiconductor lighting companies was nearly 4,000. At the same time, the Ten Cities and Ten Thousand Cities Project has also driven the development of related industries. Energy-efficient buildings, solar photovoltaics, home appliances, automobiles, electronic information and other industries have all gained wider development space.
Local governments have achieved some achievements and experiences under the leadership of the central government. At the semiconductor lighting energy conservation and emission reduction promotion conference jointly sponsored by the Ministry of Science and Technology, the Ministry of Finance and the National Development and Reform Commission before the Spring Festival, Huang Ningsheng, director of the Guangdong Science and Technology Department, said that LED is one of the key emerging industries in Guangdong, as of the end of October 2013. Guangdong has installed more than 800,000 LED street lights. It is estimated that by 2014, 2 million LEDs in the public lighting sector in Guangdong will be completed, and the output value and patents of LED industry will increase year by year. According to relevant persons in Beijing, as of September 2013 In Beijing, Beijing promoted 450,000 LED lights and LED spotlights, with an annual power saving of 30 million degrees. According to relevant persons in Xiamen, as one of the earliest cities to start LED planning, the LED industry in Xiamen has developed rapidly. During the promotion of Chengwan project, the city adopted inter-departmental establishment of working groups, financial subsidies, enterprise qualification certification, support for foreign enterprises to participate in the project and the preparation of a number of local standards to ensure the demonstration effect; In order to promote the ten-city project, the city has established and introduced the national quality supervision and inspection of semiconductor lighting products. Heart, Semiconductor Lighting Joint Innovation National Key Laboratory Changzhou Base, CSA East China LED Application Promotion Center, etc., through the construction of technology research and development, testing services, application promotion and other public service platforms, expand government procurement and other methods, driving the semiconductor lighting industry in Changzhou Development and application promotion. At present, the application of LED products in the new city of Changzhou is over 18,000 ç›, and the annual power saving is over 130,000 kWh.
The market is a barometer In recent years, the country has implemented a high-efficiency lighting product promotion project plan and a ten-city project. With the promotion of energy-saving lighting products, many lighting manufacturers realize that in order to achieve high efficiency and energy saving, firstly, energy-saving light sources should be adopted, which is the premise for promoting high-efficiency energy-saving lamps.
Before and after the Spring Festival, the LED lighting market is booming. LED lighting manufacturers are concentrating on deploying a new year's work and preparing for the opportunity. They are all looking forward to the LED lighting in 2014 to usher in a reversal opportunity.
Li Bingjie, chairman of Shanghai Jingdian Technology Co., Ltd., said that 2013 is the first year of LED lighting. There are 500 million LED bulbs in the world, which will double in 2014. Chairman of the largest LED packaging factory in Taiwan, Everlight Electronics Industry Co., Ltd. The coward said that in 2013, when the price of LED lamps fell and the number climbed, 2014 will be the LED lighting sprint year; Wu Qinghui, chairman of Taiwan Dongbei Optoelectronics Technology Co., Ltd. said that this year is the year of the LED industry's absolute counterattack, the industry It will be good enough to break the glasses; Taiwan’s LED chip factory, Yuan Yuanyuan, chairman of the board, Jane Feng Ren, also believes that this year will be a key year for the reversal of LED lighting. He expects that the LED industry will not have a low season this year, and these bulls are beginning to be active. let's move. In late January 2014, Fudi Group announced that its Fudi Electronics Co., Ltd. will cooperate with Zhaoxin Technology to invest 30 billion yuan to establish Zhaoxing Technology Co., Ltd., and establish China's fourth and fifth generation LED chip industry bases in Dongguan to seize the LED market. The base is planned to be carried out in four phases with a total investment of 30 billion yuan. Its key areas include: GaN-based, GaAs-based integrated circuits and R&D and manufacturing of high-concentration integrated solar cells, based on independent innovation of OLED planar lighting. Module technology and production equipment development and manufacturing. Jingke Electronics (Guangzhou) Co., Ltd. and the US Lanfei Optoelectronics Co., Ltd. announced that they have become strategic partners to jointly develop LED, high-power LED epitaxy, chip and module testing technologies, and leverage Lanfei Optics' extensive experience in lighting testing. Technology, providing technical support for Jingke Electronics to develop high-brightness LED integrated chips.
How to solve the development problems After the completion of the advantages and opportunities of LED lighting products, Shanghai Yaming Lighting Co., Ltd., Shenzhen Zhouming Technology (300232) Co., Ltd. related person is more willing to say from the deep mechanism behind the product that the industry is facing development Puzzle. In their view, there are many problems in the LED lighting industry: the downstream concentration of the industry is not high, and the enterprises are uneven. In order to obtain opportunities, some enterprises adopt low-price bidding in the bidding process, resulting in the profitability of the products with good product quality is not optimistic; The product specification interface is not uniform, the product interchangeability is poor; there are few qualified testing institutions, which can not meet the test requirements. At the same time, the product certification cycle is too long and the promotion difficulty is also difficult; the local government and the enterprise are difficult to connect, the promotion process is long, and the local preferential treatment Local businesses are also an unavoidable issue in the promotion process.
The above two companies all recommended that the relevant government departments support the development of leading enterprises, optimize the market environment; actively guide, give certain tax incentives, reduce the declaration process and local protectionism. For the bidding of the three ministries, it is recommended to take the intermediate value of the winning bid price to give priority to avoid the low bid. If possible, it is recommended to use e-commerce as a subsidy channel to take advantage of the recordable and traceable power data.
CSA Executive Deputy Secretary-General Qi Jun also has some research on the current LED lighting industry. He believes that the current government procurement project management system needs to be improved, government procurement project bidding, product inspection, on-site spot checks, process monitoring and acceptance assessment lacks specific management measures; in some places to support industrial development, regardless of whether the enterprise is qualified or not The project was handed over to local enterprises; some projects adopted the method of winning the bid at a low price, and some enterprises bid for the price lower than the qualified product. The products to be inspected are inconsistent with the actual application products, and the quality of the project cannot be guaranteed. At the same time, the subsidy mechanism needs to be improved, there is no promotion task in the locality, some places do not pay enough attention, and it is not included in the budget; the scope of subsidized products is narrow, some products have very little market consumption, and the most used tube lamps, bulbs, etc. The scope of subsidies has not been entered; the testing time is too long (6000 hours), which makes it impossible for enterprises to promote new products with high technology and high energy efficiency; the price of winning products is too low, and enterprises have no profit margin.
How should the government and enterprises adjust to these issues? Qi Jun suggested that market supervision should be strengthened, markets should be further regulated, catalogues of qualified products should be established, management methods for classification of credit ratings should be introduced, product guidance prices should be issued regularly, and government procurement engineering process management should be improved to provide professional and independent third-party supervision. Function, improve the project performance evaluation system, recommend the catalogue of qualified energy-saving service providers, strengthen the demonstration project construction of innovation and application; improve the financial subsidy mechanism, expand the types of subsidized products, simplify and clarify the declaration procedures and procedures, avoid bidding at low prices, and increase the bid Product procurement efforts, strengthen supervision and verification, explore the development of new financial subsidy programs; build LED modern service industry, build a cloud resource sharing platform in the field of semiconductor lighting, a comprehensive service demonstration platform, and integrate service platforms into high-tech service industry; Service platform, regularly publish government procurement related information, publicize and promote excellent practice cases; improve technological innovation layout, solve shortcomings of industrial technology, develop multifunctional and intelligent innovative technologies and products, and strengthen innovative applications such as agriculture and medical optical communication;
LED lighting industry ushered in a year of Jedi counterattack