Corrugated orifice plate structural filler High Efficiency Corrugated Filler ,Corrugated Plate Structured Filler ,High Temperature Corrugated Filler ,High Flow Corrugated Filler Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tongyangchemic.com
Application
Vacuum dryer is suitable for drying heat sensitive raw materials that can decompose and polymerize and metamorphose at high temperature. It is wide used in pharmaceutical, chemical, foodstuff and electronic industries.
Principle of work
It is well known that vacuum drying is to put raw material to the state of vacuum for heating and drying. If use vacuum to take air and humidity out, the dry speed will be faster.
Note: If use condensator, the solvent in raw material can be recovered. If use SK series water ring vacuum pump or ZSWJ series hydraulic inject vacuum pump sets, condensator can not be used and the investment could be saved.
Features
Under the condition of vacuum, the boiling point of raw material will decrease and make the pushing force become greater. Therefore for a certain amount of heat radiation, the conducting area of evaporator can be saved;
The heat source for operation of evaporation may be Iow pressure steam or surplus heat steam;
The heat loss of evaporator is less;
Before drying, the treatment of disinfection may be.
Name\specification
YZG-600 Φ×L
YZG-800 Φ×L
YZG-1000 Φ×L
YZG-1400 Φ×L
FZG-15 L×W×H
inside size of chamber (mm)
600×976
800×1274
1000×1527
1400×2054
1500×1400×1200
size of chamber (mm)
1153×810×1020
1700×1040×1335
1693×1190×1500
2386×1657×1920
1513×1924×2060
layers of baking shelf
4
4
6
8
8
layer of baking shelf (mm)
81
82
102
102
122
size of baking shelf (mm)
310×600×45
460×600×45
460×640×45
460×640×45
460×640×45
number of baking disk
4
8
12
32
32
permitted pressure inside the pipe of baking shell(Mpa)
≤0.784(8kgf/cm 2 )
≤0.784
≤0.784
≤0.784
≤0.784
temperature inside chamber()
≤150
≤150
≤150
≤150
≤150
vacuum in idle inside chamber
≤30
when vacuum is 30 torr and the heating temperature is 1100C,vaporized rate of water(kg/m 2. h)
7.2
if use condensator,type and power of vacuum pump(kw) Â
2X-15A 2kW
2X-30A 3kW
W3 5.5kW
W3 7.5kW
2X-70A 7.5kW
if not use condensator,type and power of vacuum pump(kw)
SK-0.8 2.2kW
SK-3 5.5kW
SK-3 5.5kW
SK-3 7.5kW
SK-3 7.5kW
weight of drying chamber(kg)
250
600
800
1000
2100
Structured filler is a type of filler arranged and stacked in a uniform geometric shape within the tower. The geometric shape of the entire tower section is regular, symmetrical, and uniform, and the gas-liquid flow path is clear, reducing channel flow and wall flow phenomena, and the pressure drop can be very small. At the same energy cost and pressure drop, it can provide a larger specific surface area than random fillers, and achieve higher mass and heat transfer efficiency at the same volume. Meanwhile, due to the uniformity, regularity, and symmetry of its structure, when it has the same specific surface area as random packing, its porosity and flux are greater, and its comprehensive processing capacity is much greater than that of tray towers and random filler towers. After careful design, manufacturing, installation, and operation of tower components (such as gas-liquid distributors), the industrial amplification effect is not significant. In recent decades, structured fillers have been widely used in many towers in fields such as fine chemical, spice, refining, fertilizer, and petrochemical industries.
Ce Approved Hot Air Laboratory Vacuum Oven for Drying
Model NO.: CT
Trademark: changgan
Transport Package: Wood Case
Specification: CE
Origin: China
HS Code: 8419399090