Construction Hoist Steel Structure
Construction Hoist Steel Structure means the construction hoist spare parts like Construction Hoist Mast Section, Passenger Hoist Cage, Construction Hoist Wall Tie and so on.
The length of each mast section is 1508mm, the rack is fixed on the mast by three bolts and it can be exchanged. For the single cage hoist there is only one rack on the mast section, and the mast section can be used for the double cages hoist by increasing one rack. The section of the mast is diverse, select one type section according to different hoist. The mast sections are bolted together with M24 bolts and nuts to form mast. The mast is tied to the building with tie-in and is the guide rail of the cage. According to the user`s or circumstance`s request, surface of mast is hot dip galvanized, which can prevent it rusting.
The tie-in(wall tie) is the linked part between mast and building, to keep the stabilization of the mast. Distance between the tie-in is about 6~9m alone the mast. There are several types of tie-in. Select one of them according to need, tie-in can adjust the vertical of mast in definite ranges. According to the user`s or circumstance`s request, surface of the tie-in is hot dip galvanized, which can prevent it rusting.
The cage dimension(L×W×H)(m): 3×1.5×2.5. We can also manufacture cages of other size according to the user`s needs. The material of the cage and the door material can be steel wire weave, aluminum-plastic panel, punched-plate, figured aluminum board or other type according to user`s needs. The gate is equipped with drawing gate,include small turn over gate.
Construction Hoist Mast Section,Building Hoist Mast Section,Passenger Hoist Cage,Construction Hoist Wall Tie, Construction Hoist Anchorage Frame SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sysuspendedplatform.com
Model
Capacity
(m3/h)Pressure
(MPa)Vaccum
(m. H2O)Diameter
(inch/mm)Face to Face
(mm)Power
(KW)
2CY1.1/14.5
1.1
1.45
5
G3/4"
200
1.5
2CY2/14.5
2
1.45
5
G3/4"
200
2.2
2CY3.3/3.3
3.3
0.33
5
G1"
200
1.5
2CY5/3.3
5
0.33
5
G1 1/2"
200
2.2
2CY8/3.3
8
0.33
5
G2"
260
3
2CY8/6
8
0.6
5
G2"
260
4
2CY8/10
8
1
5
G2"
260
5.5
2CY12/1.3
12
0.13
5
G2"
260
4
2CY12/3.3
12
0.33
5
G2"
260
5.5
2CY12/6
12
0.6
5
G2"
260
5.5
2CY12/10
12
1
5
G2"
260
7.5
2CY18/3.6
18
0.36
5
70
234
5.5
2CY18/6
18
0.6
5
70
234
7.5
2CY29/3.6
29
0.36
5
70
234
7.5
2CY29/6
29
0.6
5
70
234
11
2CY38/2.8
38
0.28
5
100
280
11
2CY38/6
38
0.6
5
100
280
22
2CY60/3
60
0.3
5
100
280
22
2CY100/3
100
0.3
5
150
400
30
2CY100/6
100
0.6
5
150
400
55
2CY120/3
120
0.3
5
150
400
30
2CY120/6
120
0.6
5
150
400
55
2CY150/3
150
0.3
5
150
400
37
2CY150/6
150
0.6
5
150
400
75
2cy150/6 Gear Pump for Diesel Oil Transfer
Model NO.: 2CY150/6
Material: Iron/Steel/Stainless Steel
Trademark: HG
Transport Package: Wooden Case
Origin: China
HS Code: 84131100
2CY series Gear pump is mainly to carry the lubricator in various lubricating system of mechanical equipments, also it's suitable to carry the oils with the lube feature and their viscosity should below 300cst and the temperature should less than 300 degree centigrade, furthermore, the gear pump in stainless steel can transport the edible oils, beverages and so on. The pump hasn't valve itself. Shaft seal has skeleton oil seal, mechanical seal and stuffing seal.