Construction dosage: 3-5 kg ​​per square meter of tile and mosaic (depending on the level of the base). Foshan Shang Taoju mosaics http://13727377303 Tile adhesive = http://?id May be the cabinet of aluminium alloy used for manufacturing later, people developed the push-pull cabinet.Push-pull cabinet did not stop the problem, because of push-pull cabinet casement opening and closing of stationary state basic same. Cabinet Hardware,Zinc Die Casting Cabinet Handle,Zinc Die Casting Cabinet Switch,Coated Cabinet Hardware NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.blcastings.com
Scope of application: This product can be used not only for cement mortar base, but also directly on the walls, floors, long-term immersed bathrooms, and sinks made of gypsum board, plywood, density board, indoor and outdoor cement or masonry substrate, and even paste the tiles. New tiles can be overlaid on the old tile base.
Construction dosage: 3-5 kg ​​per square meter of tile and mosaic (depending on the level of the base). Tile adhesive is an organic-inorganic compound tile adhesive material made of high-quality cement, fine aggregate, filler, special admixture and dry powder polymer. It is green, non-toxic and harmless, and it replaces traditional cement. The best choice for mortar paste tiles. Tile adhesive construction thickness is only 2-4MM, and the thickness of the traditional cement mortar is usually 15-30MM, so as long as the construction of the base surface is flat, the overall cost of the thin layer paste construction is lower than the traditional cement mortar paste, Bonding quality is more reliable, bagged powder is added to water, and construction is faster.
Scope of application: This product can be used not only for cement mortar base, but also directly on the walls, floors, long-term immersed bathrooms, and sinks made of gypsum board, plywood, density board, indoor and outdoor cement or masonry substrate, and even paste the tiles. New tiles can be overlaid on the old tile base.
One disadvantage of push-pull cabinet is a must have at least one fixed fan, greatly reduce the cabinet area: the other is a fatal weakness could not meet the requirements of air tightness and water tightness.
Of push-pull cabinet casement fixed point is up and down two guide rail, so the wind pressure strength is limited.Modern building more and more high to the requirement of energy conservation and other functions, the sealing of the cabinet, sound insulation and heat insulation, air tightness and water tightness and wind resistance strength and security level, there are strict requirements.To meet the requirements of a variety of integrated and produced within the batter casement cabinets, or the Europe type cabinet.
The cabinet of modern glass curtain wall building model related to the cabinet frame on the wall of the fixed way.Because the glass curtain wall of air tightness, water tightness and wind resistance strength of the demand is higher, on the curtain wall cabinet accessories, according to the need to develop relatively independent.
Modern architecture of the cabinet is not confined to the level of manpower and starting from the requirements of ventilation heat removal, the height of the cabinet is an important factor decided to take a breath row of thermal efficiency, so people invented all kinds of cabinet.
The use of paving mosaic tile adhesives
Tile adhesive is an organic-inorganic compound tile adhesive material made of high-quality cement, fine aggregate, filler, special admixture and dry powder polymer. It is green, non-toxic and harmless, and it replaces traditional cement. The best choice for mortar paste tiles. Tile adhesive construction thickness is only 2-4MM, and the thickness of the traditional cement mortar is usually 15-30MM, so as long as the construction of the base surface is flat, the overall cost of the thin layer paste construction is lower than the traditional cement mortar paste, Bonding quality is more reliable, bagged powder is added to water, and construction is faster.