RM0301033 Water Cap Mould, Filter Cap Mould, Seal Cap Mould, Cap Mould

Model NO.: RM0301033
Runner: Hot Runner
Design Software: UG
Installation: Semi Fixed
Standard: HASCO
Customized: Customized
Name: Water Cap Mould
Cavity Nos: 4 / 8 / 16 / 24 / 32 / 64 Etcc
Mould Material: P20 / H13 / S136
Base Material: 45#
Mould Life: 1,000,000 Shots Under Right Use
Ejector System: Motor / Chains / Stripper Plate / Ejector Pins
Runner System: Hot Runner / Cold Runner
Gate Type: Submarine Gate
Cooling System: Individual Water Cooling
Sample Time: 20-40 Days
Trademark: REMO
Transport Package: Wooden Case
Specification: International Standard
Origin: Taizhou China
HS Code: 84807190
Remo Mould has 10 years experience in cap moulds making including spring water cap, sports bottle cap, flip top cap, butterfly cap and some customorized cap moulds.
Our advantages:
1. High cavity numbers for mass production
2. Good mould material for polish system
3. Fast article & mould design
4. Excellent fitment condition
5. Weekly report with mould processing photoes available
6. Mould trial video available
7. Qualified samples before mould shipment
RM0301033 Water Cap Mould, Filter Cap Mould, Seal Cap Mould, Cap MouldRM0301033 Water Cap Mould, Filter Cap Mould, Seal Cap Mould, Cap MouldRM0301033 Water Cap Mould, Filter Cap Mould, Seal Cap Mould, Cap Mould
Business Step 
1.R&D We support customer R&D. Make the files or improve the design if you needed 
↓↓↓
2.Quotation Making Mould Quotation will be finished in  1  day according to information we get
↓↓↓
3.Negotiation  The quality ,price ,material,delivery time .payment item.ect 
↓↓↓
4.Mould Design  3-5  days for mould and product 3D/2D drawing design
↓↓↓
5.Mould According to customers' request to build the mould.Before make the mould .we send mould design to customer approval first . Mould will be usually finished in  25-60  days 
↓↓↓
6.Mould Testing When moulds are finished,we will test the moulds to check it satified consumers' needs.And we will  send samples  for consumers' reference.
↓↓↓
7.Sample shoot  If the first sample come out is not satisfied customer .we modify the mould and until meet customers satisfactory 
 ↓↓↓ 
8.Delivery  Delivery goods by  sea  or by  air  ,according  customers requirement 

 Chemical parts investment casting is one branch of Alloy Steel Precision Casting, which is widely used in chemical industry markets. Casting for chemical parts adopts lost wax casting, also called investment casting. 

 In wax pattern process,we mix stearic acid and paraffin wax. In wax pattern making, as you know, it is better than polyethylene, and the wax deformation is small. In dipping slurry process, most of the suppliers adopt water glass technics in domestic area,but we adopt compound technics or silica sol technics.

 In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at  24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.

 In dewaxing process, about 95% of the castings suppliers adopt the original water dewaxing technics, but we using the advanced steam dewaxing technics, which we are very proud of.This can effectively avoid the air-hole and sand-hole,making the casting look much nicer.

 In smelt process,we use middle frequency furnace,avoiding the emergence of the oxide; in molten steel control part, we use Germany-imported direct reading spectrometer machine,assuring its quality before the molten steel out of the furnace. During this process we use ERP production and management software to get the feedback information.

 In heat treatment process, we use electric furnace,and adopt double-temperature control in order to heat the products equally. As a result, the products will have great metallurgical structure.

 Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.

 In machining process, we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.

 Our chemical parts investment cast has quality assurance in accordance with ISO9001: 2008, strict material inspection and exact dimension control, with 100% quality control. OEM order is welcome. The investment casting of chemical parts can be made completely based on your specifications such as drawing, design, sample etc.

           Chemical Parts Investment Casting

 

Chemical Parts Investment Casting

Chemical Parts Investment Casting,Investment Casting of Chemical Parts,Precision Castings of Chemical Parts,Chemical Parts Precision Castings

Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com