Open Type Vacuum Auto Loader

Model NO.: SAL-U

HS Code: 8428399000
EU style open type auto loader features:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
1)Stainless hopper receiver to eliminate contamination.
2) Microprocessor controller for ease of use and has multipile alarm indicators.
3) Motor overload protector ensure long motor life.
4) Audible material shortage alarm device.
5) Filter designed for easy cleaning and has filter status checking window for easier monitor of filter condition.
6) Both vacuum hopper and photosensor hoper can be directly mounted on moulding macchine's feed port. The above mentioned loaders adopt standard stainless steel mesh
7) Cyclone separator can reduce filter clean frequency when used for dusty regrind materials.
8) Proportional valve for mixing virgin and regrind materials, or for material instant recycling.

Â
Â

Model Motor power Feed
Â Height Feed
capacity Static
Â air Press Hopper
Â Capacity tube
Diameter. Demension (cm)

Kw /HP M Kg / H pa L mm loader hopper

SAL-U1HP 0.75/1 4 300 1600 6 1.5 100*40*50 94*53*38

SAL-U2HP 1.5/2 4 400 2000 12 1.5 100*40*50 132*73*47

SAL-U3.5HP 2.4/3.5 6 800 2500 24 2 138*490*590 150*78*50

SAL-U5HP 3.75/5 6 1000 3000 24 2 138*490*590 150*78*50

SAL-U7.5HP 5.5/7.5 6 1200 3000 36 2.5 173*58.5*67 104*89*63

SAL-U10HP 7.5/10 8 1500 4000 36 2.5 173*58.5*67 104*59*43

SAL-U15HP 10/ Â 2000 5000 48 3 173*58.5*67 104*59*43

Notes Type of Induction and Carbon on motor is optional.

The technical parameter is only for reference, there is no additional notice giving for any alterations

Telescopic Belt Conveyor
At present, the parameters of conventional telescopic belt conveyors on the market have the following standard dimensions: the specific dimensions can be communicated and customized with the manufacturer.

1. Fixed size of conveyor belt width: 800mm;

2. Fixed size of machine height: three-section machine, 650mm; four-section machine, 850mm;

3. The height of the bracket is fixed: 750mm;

4. Fixed extension length of machine: 7m, 8m, 9m, 12m, 14m, 17m;

5. Hydraulic lifting angle: 4Â°;

6. Rated voltage of the machine: 380V;

7. Operating weight: 50kg-80kg, with a limit of 100kg. Exceeding this range will greatly reduce the service life of the machine and increase after-sales problems.

Telescopic Belt Conveyor,Telescopic Conveyor,Telescoping Conveyor,Telescopic Conveyor System
DMT Machineries (Suzhou) Ltd , https://www.dmtsz.com