Lithium Positive Cathode Material Crushing Classification Professional Equipment
â— Suitable for lithium iron phosphate, lithium carbonate, lithium cobalt oxide and other battery anode materials special ultra-fine crushing;
â— High purity: ceramic lining and PTFE protection, graded impeller and nozzle with alumina or zirconia material;
â— In the crushing process, due to the sharp expansion of the air flow, the air flow temperature is reduced, especially suitable for the crushing of heat sensitive, low melting point, sugar and volatile materials;
â— Materials collide with each other for crushing, different from mechanical crushing relying on dao pieces or hammer on the impact of material crushing, so the equipment is wear-free and the product purity is high;
â— It can be used in series with multi-stage classifier to produce products with multiple particle size segments at a time;
â— Compact structure, convenient disassembly and cleaning, smooth inner wall without dead Angle;
â— The whole system is closed and crushed, no dust, low noise, clean and environmentally friendly production process;
â— The control system adopts program control, easy to operate;
â— Can be mixed and crushed several kinds of materials, variable combination structure, compact structure, - machine multi-purpose.
Lithium Cathode Material Crushing Classification Professional Equipment,Lithium-Ion Battery Cathode Materials,Cathode Active Material Production Process,Brunp Battery Recycling Shandong Jing Xin Powder Equipment Technology Co., Ltd. , https://www.jxpowder.com
Murata Machinery has developed the spindle active lathe "MV200". It is scheduled to be exhibited at the "MECHATRONICS TECHNOLOGY JAPAN" (Nagoya International Exhibition Center) held on October 17-20, 2007, and will be listed on the same day. The chuck size is 250 mm in diameter. It is the same as the "MV120" with a chuck diameter of 205mm. It is characterized by the fact that although it is a manual model, the workpiece is transported by the spindle chuck. There is no need to perform loading operations such as mounting blanks on the spindle chuck.
Since the workpiece can be automatically attached to the spindle chuck, the operation error is less and the assembly and disassembly time is shorter than that of the manual model. The lathe loads the next processing blank while the operator is machining, until the completed workpiece is taken out, and the series of actions takes 3.0 seconds (measured by the company). By automating the loading operation, the average number of machines that can be operated by each operator is increased.
When multiple MV200s are arranged to form a production line, it is easier to meet the needs of process modification because the workpieces are manually handled between processes. In addition, it is possible to construct a production line suitable for single-piece production of variant variables.
In terms of rapid feed rate, the X/Z axes are 40 m/min and 30 m/min, respectively. The workpiece with a diameter of 200 mm × length 100 mm can be machined under standard conditions. In addition to the 10-point servo head, an auxiliary thread comb cutter table is also provided. The tool table can be equipped with a rotary cutter assembly, a deburring assembly and a grinder assembly for centralized assembly of the process.
Murata Machinery Introduces New Model of Spindle Active Lathe for Automated Loading Operation
"MV200" that can automatically perform loading operations