Kp550pn Good Quality 500kw Prime 400kw Natural Gas Genset

Model NO.: KP550PN
Voltage 1: 380V/220V 400V/230V 415V/240V 480V/277V
Frequency1: 50Hz
Voltage 2: 220V/127V 230V/132V
Frequency2: 60Hz
Trademark: Kanpor
Transport Package: Plywood&Plastic with Foam
Specification: diesel engine W/C alterantor with controller
Origin: Original of China
HS Code: 8502110000
Model NO.: KP550PN
Voltage 1: 380V/220V 400V/230V 415V/240V 480V/277V
Frequency1: 50Hz
Voltage 2: 220V/127V 230V/132V
Frequency2: 60Hz
Trademark: Kanpor
Transport Package: Plywood&Plastic with Foam
Specification: diesel engine W/C alterantor with controller
Origin: Original of China
HS Code: 8502110000

KP550PN Good Quality Standby output 500KW,prime output 400kw natural gas generator

Natural Gas/Biogas Diesel Generator Set
Gas Genset, Natural gas diesel generat set,From 24kw-2400kw Powered by Cummins / Weichai / Deutz
Kp550pn Good Quality 500kw Prime 400kw Natural Gas Genset

Kp550pn Good Quality 500kw Prime 400kw Natural Gas Genset
Kp550pn Good Quality 500kw Prime 400kw Natural Gas Genset

The technical parameters of natural gas genset
1.1. Generator Set Parameters  
Model: KP500-PN
Performance Grade: G2
Rated Power: 440kW 550kVA
Standby Power: 400kW 500kVA
Rated Current: 720A
Rated Voltage: 400/230V
Rated Frequency: 50HZ
Rated Speed: 1500rpm
The Factor of Rated Power: 0.8(lag)
Phase: 3Phase, 4line
The regulating rate of steady voltage: ≤±1%
The regulating rate of instantaneous voltage: ≤±20%
The regulating rate of steady frequency ≤1%
The regulating rate of instantaneous frequency: -10%~+12%
The time of steady voltage: ≤1s
The Recovery Time of Frequency: ≤5s
Usage Condition: Temp. -12~45ºC, altitude ≤2200m
Fuel Consumption(Nm3/Kw.h)
0.29Nm3/Kw.h
1.2. Engine Parameters  
Model: KP6190N/450KW
Type: Line, 6-cylinder, 4-stroke
Air Intake: Turbocharged, AA-inner-cooling
Bore*Stroke: 190mm*210mm
Starting Method 24VDC electric start
Air intake way Turbo cooled
Fuel control Oxygen sensor closed loop control
Coefficient of gas Proportion type hybrid
Cooling system Closed-loop water cooling
Oil consumption 1.08g/kw.h
Compression Ratio: 11.5:1
Displacement: 35.8L
Rated Power: 450KW
Speed: 1500rpm
The regulation of rotating speed E-Speed
Start Method: DC24V Electric start
1.3. Alternator Parameters  
Mode: STF354D-400KW
Type: Three-phase, four-wire, Brushless Exciter
Rated power: 400kW 500kVA
Rated voltage: 400/230V(AC)
Frequency: 50Hz
Insulation class: Class H
Protection class: IP23
cooling method: Air-cooled, self-cooling
1.4. Control System:  
Electronic throttle Bosch
Air inlet temperature pressure sensor Bosch
Crankshaft position sensor Bosch
Wide range oxygen sensor Bosch
ignition coil IC-SP
RC pressure regulator MADAS
Proportional mixer IMPCO
1.5.Weight and Size Parameters  
Open type weight (kgs) 9980
Open type size (mm) 6000*1950*2100
Soundproof type weight (kgs) 11980
Soundproof size (mm) 7200*2100*2200
QUOTATION open type FOB FUZHOU USD73882
QUOTATION silent type FOB FUZHOU USD79211
QUOTATION open type FOB FUZHOU USD62799
QUOTATION silent type FOB FUZHOU USD67320
QUOTATION open type CNF KARACHI K PORT USD63799
QUOTATION Silent type CNF KARACHI K PORT USD68320
2.1 Design Philosophy  
The generating set is a power generation device with the gas fuel as the power source, and the thermal power is converted into electric energy by the ignition engine. Equip cooling system, lubricating system, fuel supplying system, control system, power output, parallel, common base. Able to work with low pressure, high pressure gas and liquid fuel.
Connect the gas engine to the alternator with flange and install on the welded common base. Set shock mitigation system to eliminate the vibration when running.
Unit control system group use the control module DEEPSEA or SMARTGEN Generator set and set on the common base.
Set the gas valve integration group on the common base, include Manual cut-off valve, pressure gauge, filter, pressure regulating valve, safety electromagnetic cut-off valve, flame blocking device.
Gas engine: using Weichai/Cummins/Deutz/Doosan diesel engine as base machine, high energy sequential ignition, Gas specific debugger, all parts of control system are from the well-known brand in the word.
Alternator: jiangsu lingyu self excitation brushless AC synchronous generator
2.2.Running Requirement  
gas pipe inlet pressure kPa ≥15kpa
methane volume content ≥70
Heat Value MJ/Nm 3 ≥34.09
H2S concentration mg/Nm3 ≤150-200
NH3 Concentration mg/Nm3 ≤20
Impurity particle Concentration mg/Nm3
≤30
Impurity particle size μm ≤5
Water Concentration g/Nm ≤40g/Nm 3 , No free water
2.3. Formation of Mixed Gas
Air will be filtered from the dry type filter of engine.
pressure regulating valve evenly supply gas and mix via proportional mixer.
Exhaust gas turbocharger compress mixed gas to improve the engine charging efficiency.
using oil cooling or water cooling double cooling booster to ensure booster regular works.
inner cooling system
using air to air or water to air inner cooling to reduce the mixed gas temperature, increase the density and improve the engine efficiency.
2.4. Engine Ignition Management System
After the control system of the muti-point sequential ignition engine collects the position signal of the camshaft, it controls the ignition coil to fire in sequence
DC24V
The ignition time and ignition energy can be accurate via programming the Map
Equip high energy ignition coil for each cylinder
Self-learn Function: ECW will self-correct the running parameter via temperature sensor, pressure sensor and throttle position signal.
Industrial grade spark plug, high voltage wire
Work Temp. :-20°to 85°
Exhaust System
Dry Type,Heat insulated exhaust manifold
Industrial grade muffler
Exhaust shock proof corrugated pipe
2.5. Lubricating System
Forced lubricgtion by Lube oil circulation pump with safety valve, and splash lubrication.
Lube oil heater (Optional)
Standard fleetguard filter with the engine manufacturer
The brand of lube oil: Special lube oil for Nature Gas Gensets(Recommendation)
3.1 Coolant filling volume  
Engine coolant filling volume(L) 12.3
Standard thermostat to adjust the temperature 83-95
(°C )  
   
The maximum temperature of engine coolant 105
(°C)  
Coolant Type 50% of demineralized water, 50% antifreeze (ethylene glycol antifreeze concentration between 40% -68%)
   
3.2 Oil filling volume  
Lubricant minimum filling capacity(Sump+ Oil Filter) (L) 23.8
Oil pressure during normal operation(Idling) kPa >103
Oil pressure during normal operation (Rated speed)( kPa) 276-414
Oil temperature(Sump) (°C) 121
Oil Class (Ambient temperatures >-5°C Ambient temperatures<-5°C)  15W-40 CH4 10W-30 CH4
   
4  
Packaging Details: Plywood case
Delivery Detail: 20 Working days after receiving the deposit


Kp550pn Good Quality 500kw Prime 400kw Natural Gas Genset

Green power Biogas power generator

 

BioGas generator: Natural gas /Biogas generator power range China High Efficiency Biogas Generator

Kanpor new energy series: nature gas generators, power range is from 24kw to 2400kw, 1500rpm, 50Hz, 400/230V adjustable.

Gas Type: BioGas generator

 

 190 Series Methane Biogas Power Generator (50/60Hz)

Model

Prime Power

Continuous 

Power

(for 24-hr)

Engine

Model  

Rotation Speed RPM (50hz/60hz)

Alternator Siemens
or Equal

No.of Cylinders & Type

Overall dimension 

(L*W*H)(mm)

Weight

(kg)

KW

KVA

KW

KVA

KP-38B

30

38

24

30

4105G

1500/1800

1FC Series

4.L

2100*900*1500

1100

KP -50B

40

50

32

40

4135T

1500/1800

1FC Series

4.L

2250*900*1550

1350

KP -63B

50

63

40

50

4135AT

1500/1800

1FC Series

4.L

2250*900*1550

1450

KP -75B

60

75

50

63

6135AT

1500/1800

1FC Series

6.L

2250*900*1550

2000

KP-100B

80

100

64

80

6135T

1500/1800

1FC Series

6.L

2700*1000*1800

2250

KP-125B

100

125

80

100

6135T

1500/1800

1FC Series

6.L

2700*1000*1800

2300

KP-150B

120

150

100

125

6138T

1500/1800

1FC Series

6.L

2700*1000*1800

2450

KP-188B

150

188

120

150

12V135T

1500/1800

1FC Series

12.Vee

3400*1350*1850

3500

KP-250B

200

250

160

200

12V138AT

1500/1800

1FC Series

12.Vee

3570*1350*1850

3600

KP-300B

240

300

200

250

12V138AT

1500/1800

1FC Series

12.Vee

3700*1350*1900

3800

KP-375B

300

375

240

300

6190ZLT

1000/1200

1FC Series

6.L

4980*1760*2230

8900

KP-400B

320

400

260

325

G8V190ZLD

1000/1200

1FC Series

8.Vee

4566*2040*2200

10700

KP-500B

400

500

320

400

12V190DT

1000/1200

1FC Series

12.Vee

4566*2040*2200

11800

KP-563B

450

563

360

450

12V190ZDT

1000/1200

1FC Series

12.Vee

4790*2040*2212

11800

KP-625B

500

625

400

500

12V190ZDT

1000/1200

1FC Series

12.Vee

4790*2040*2212

12000

KP-625B

500

625

400

500

12V190ZDT-2

1000/1200

1FC Series

12.Vee

4790*2040*2212

12000

KP-750B

600

750

500

625

G12V190ZLDT

1000/1200

1FC Series

12.Vee

5260*2040*2500

12800

KP-875B

700

875

600

750

AD12V190ZLT

1000/1200

1FC Series

12.Vee

5800*2200*2500

15000

KP-1000B

800

1000

800

1000

H16V190ZLT

1000/1200

1FC Series

16.Vee

6070*2380*2776

22000

KP-1250B

1000

1250

800

1000

H16V190ZLT

1000/1200

1FC Series

16.Vee

6070*2380*2776

22000

KP-1375B

1100

1375

900

1125

H16V190ZLT

1000/1200

1FC Series

16.Vee

6070*2380*2776

22000

KP-1500B

1200

1500

1000

1250

H16V190ZLT

1000/1200

1FC Series

16.Vee

6070*2380*2776

22000

KP-1600B

1280

1600

1000

1250

H12V240ZDT

1000/1200

1FC Series

12.Vee

6710*2950*3000

32300

KP-2000B

1600

2000

1280

1600

H16V240ZDT

1000/1200

1FC Series

16.Vee

11000*4000*4000

39000

KP-2750B

2200

2750

1760

2200

H16V280ZDT

1000/1200

1FC Series

16.Vee

11900*4000*4000

44000

KP-3750B

3000

3750

2400

3000

H16V280ZDT

1000/1200

1FC Series

16.Vee

12000*4000*4000

46900

 

 

 

 

USA Googol will be emphasis on producing big horsepower engine with the developing direction on environmental type and save energy type. We will lead the developing and keep advantage in engine filed in China, and also we will follow the top level with the world technique. Our products will be mainly used for power generator set, construction, marine ship, kinds of industry usage.
 

Googol Engine Feature

All Engines will be 4 cycle stroke, P780 series is 6 cylinder in line P890/1120/1340/1780 series will be V-type 8/10/12/16 cylinder,Q2160/3240/4320/5400 series will be V-type 8/12/16/20 cylinder Turbocharged and water-air / air-air intercooler technology Smaller size, lower weight

1, Cylinder Block

High quality alloy cast iron for rigidity performance and good stability with the feature for reducing engine working vibration and noise. Wet cylinder liner with good cooling effect and work performance, more easy to replaced.

2.Crankshaft- Steel

Robust and fully balanced crankshaft design by integral  forging for a more steadily and higher strength and longer working life.The main bearing is produced by world leading quaternary spray coating process with long life and reliability.

3.Connect rod

Connect rod is made by advantage up broken type process with higher precision. It will lead to longer life for connect rod and bearing by increase the withstand impact.Steel piston is casting with aluminum alloy for better durability and boost engine output.

4.Cylinder Head and Valve

2 valves for P series and 4 valves for Q series per cylinder, Optimize the mixed air/fuel level which lead to an excellent fuel consumption rate and emission performance.High quality alloy cast iron for the cylinder head, one cylinder with one head, easy for maintenance and service.

5. Camshaft

Single camshaft for PV series engine and installed in the middle position of engine which lead to small size and low maintenance cost.

6. Intake & Exhaust System

Advanced turbocharger and water-to -air or air-to-air after cooler technology, ensure enough intake air and decrease the temperature, provide excellent emission performance.Pulse exhaust manifold increase the efficiency when engine run at lower load condition, and lead to excellent fuel consumption rate.

7. Fuel System

High pressure injection system make the fuel injector open pressure above 280bar, which lead to an excellent fuel consumption. Check valve in fuel lines improve reliability.

8. Lubrication System

Gear oil pump will supply the lubrication oil to all bearings, and cooling the piston inner through the cooling jet.

9.Cooling System

Great flux water pump provide effective cooling. Two water pump design for Q series engine, improve the performance at high load condition, and provide excellent emission performance.

10.Electrical System

24V DC starting  motor and 45A battery charging system.

 

 

Application & Gas Type: 

. Biogas (Landfill Gas, Wastewater Biogas, City Sewage Biogas, Farm Biogas, etc. ); 

. Natural Gas, Oil Field Gas, Shale Gas; 

. Coal Gas

. Distributed Energy System (Combined Heat & Power Plant)

 

Products Description

1.Specially-designed air valves, crankshaft, camshaft, pistons, ignition system and combustion chamber according to international brands gas engine technology(Googol, MAN, Guascor, Daewoo)

 

2.Adopting high-precision special gas engine speed governor: Precise speed governing, instant recovering ability so as to fit different loads upon the three signals: Rotating speed, load and temperature.

 

3.Economical and low-cost running: Lower gas and oil consumption.overhaul term: 18000~25000 hours

 

4.Using advanced intelligent Deep Sea 7510 genset controller: Capable computer chip, with full monitoring, control, alarm and protecting function, all-in-one configuration for all kinds of demands.

 

5.Electrical system: 24V cranking motor starting and battery charging system. Parallel operation with genset or city power grid for option. 

 

 Control system of biogas generator:

  a) Automatic alarm system: the unit has the acousto-optics alarm system and arrestor for any situation as the start defeat, the water is over temperature, the oil pulls down, over speed, over load and over current

  b) Operation display:

Auto Cylinder Head

Auto Cylinder Head,Head Gasket Repair ,Cylinder Head Repair ,Cylinder Head Gasket

Metal Processing Machinery Parts Co., Ltd. , http://www.nbpumpparts.com