Recently, Jaguar Land Rover (China) Investment Co., Ltd. filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine, and will recall part of the imported 2017 Jaguar F-PACE series car produced on April 12, 2016 from March 31, 2017. . According to the company's statistics, there are 48 vehicles in mainland China.
Threaded Rebar Bolt
Threaded Rebar Rock Bolts(Threaded Steel Rock Bolts) are mainly used in mines where rock formations such as coal mines are not hard enough. bolts are generally used together with anchoring agents to achieve end anchoring or full anchoring in mines.
ANTO Rebar Rock Bolt is made of high-strength HRB500 or HRB600, which can provide high load-bearing capacity to protect mine safety.
Compared with other bolts, it can be installed using ordinary foreign drilling rigs, which saves installation costs.
ANTO Rebar Bolts, the threads are distributed throughout the rod body, increasing the moving length of the nut, if the anchor rod support is loose in the later stage, tighten the nut, and the anchor rod restores the support force.
The one-way left-handed rebar bolt without longitudinal reinforcement can be used in all kinds of mines and underground projects, and is especially suitable for the support of coal tunnels with wire mesh. It has achieved good technical and economic effects.
The structural features of the anchor rod: the full length of the body has a rolled continuous thread, and the full length is of equal strength; the fastening end is provided with a prestressed gasket and a ball nut. It is superior to the bolt processed by round steel, and is a new type of bolt with material saving, labor saving and equal strength.
Threaded Rebar Bolts,Mining Threaded Rebar,Threaded Rebar Anchor,Customized Threaded Rebar Bolt ANTO MINING EQUIPMENT CO.,LTD , https://www.antobolts.com
Some vehicles in the scope of this recall were equipped with the wrong rear left axle due to the supplier's reasons, which caused the vehicle to have the risk of abnormal noise and oil leakage. In some cases, the half shaft may come out, causing the vehicle to lose power and present a safety hazard.
Jaguar Land Rover (China) Investment Co., Ltd. will conduct free inspections for vehicles within the scope of the recall. If the specifications do not match, the correct half shaft will be replaced to eliminate the defects.
If the relevant users notice the abnormal noise of the chassis and the oil leakage at the half shaft, please promptly go to the nearest Jaguar Land Rover authorized dealer for repair. The user should contact the dealer for repair as soon as possible after the recall operation begins.
Jaguar Land Rover (China) Investment Co., Ltd. will notify customers by registered mail, telephone, SMS and other forms. Users can obtain information about the recall by calling Jaguar Land Rover (China) Investment Co., Ltd. hotline 400-820-8955. Users can also visit the AQSIQ website inspection and supervision department (jyjgs.aqsiq.gov.cn), the AQSIQ Defective Product Management Center website () and the WeChat public account (AQSIQDPAC) to learn more. information. In addition, you can also call the Defective Product Management Center hotline or the local entry-exit inspection and quarantine agency's quality hotline: 12365 (switch No. 2), reflecting the problems in the implementation of the recall or submitting defects.
·Jaguar Land Rover (China) Investment Co., Ltd. recalled some imported Jaguar F-PACE series cars