Angle Light Keel Roll Forming Machine is used with T ceiling, usually used in hotels, railway stations, playgrounds, supermarkets, factories, car transport stations, interior decoration and other places set. It is PLC control, servo tracking cutting, has light weight, high strength advantages.
Specifications:
Working process:
Decoiler - Feeding guide - Straightening - Main roll forming machine - PLC control system - Servo tracking cutting - Receiving table
Pictures of machine:
Training and Installation : Angle Keel Forming Machine,Angle Keel Roll Forming Machine,Steel Angle Keel Roll Forming Machine,Angle Bar Roll Forming Machine YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn
Raw material
PPGI, GI, Aluminum coils
Material thickness range
0.3-1mm
Forming speed
30-40m/min(without punching)
Rollers
12 rows
Material of forming rollers
45# steel with chromed
Shaft diameter and material
40mm, material is 40Cr
Controlling system
PLC
Material of cutting blade
Cr12 mould steel with quenched treatment
Voltage
380V/3Phase/50Hz or at your requirement
Main motor power
4KW
Hydraulic atation power
3KW
Way of driven
Gear box
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantage:
1. Short delivery period.
2. Effective communication
3. Interface customized.
How to quickly deal with the front glass fog
The "frost fall" in the "24-year period" has already passed. The frost-thropping solar season has the meaning of gradually getting cold and the appearance of the first frost. It is the last solar term in autumn and also means the beginning of winter. During the frost season, the fog increased, and the front windshield of the car was again challenged. But don't worry, Xiao Bian has put together a quick way to deal with the front windshield for everyone and it's easy to fight the fog.
The cause of fog in the windows is “internal heat and coldâ€. When the temperature difference between the inside and outside of the vehicle is large, the water vapor exhaled by the occupants of the vehicle will condense into water vapor when it encounters cold glass. This is an old problem, but it is not a minor problem. Once the sight line is blocked, accidents may occur within seconds. Therefore, fog removal is essential.
The day before yesterday, the reporter interviewed Mr. Han, who had a five-year driving experience, Mr. Lin, coach of Wanli Steamship School, and Mr. Su, a teacher of Shunfeng Auto Repair Shop, and summed up three methods with higher usage rates for comparison.
The most primitive way: wipe with a dry cloth or paper towel
Advantages: immediate results
Disadvantages: laborious, unsafe, leaving traces after rubbing
The most primitive method is to wipe the glass directly with a dry cloth. This kind of scene must have been seen by many citizens: The old drivers always keep a towel, and when they stop at the red light, they wipe the glass. The disadvantage of this method is that it is relatively laborious. After the wiping, the glass will leave traces, and it will fog again very soon. If you wipe while driving, you can easily cause an accident.
The most convenient way: blowing with hot air
Advantages: no distraction
Disadvantages: Slow start, the rest of the window still fog
The second method is to blow directly with hot air. However, this method is relatively slow, and the fog on the front glass is getting bigger and bigger when the vehicle is just opening the hot air. It takes only 10 minutes for the glass to become clear.
The most creative way: detergent with a dry cloth
Advantages: good preventive effect
Disadvantages: To deal with in advance
The owner of the car, Mr Han, is willing to accept new things. On the issue of “dust removal from the cold,†he collected a lot of materials on the Internet and tested the “cleaning detergent with a dry cloth†method. The effect was not bad. Choose a sunny day, use the kitchen detergent to dilute the water (1:6 or so), use a sponge evenly coated on the glass in the car, etc. After the dry, wipe with a dry cloth, do not leave traces. In general, the effect lasts for half a month.
4s shop after-sales staff told reporters that this method is feasible, because detergent contains surfactant, which can change the surface tension of water, so that the droplets quickly condensed into large droplets, can play a anti-fog effect. "However, this is a precautionary measure and must be handled in advance. If we wait until we find out that it is too late, it will be too late."