Sebacic Acid For Environmentally Friendly Products Sebacic Acid For Environmentally Friendly,Sebacic Acid For Synthetic Resin,Material Plasticizer Sebacic Acid,Sebacic Acid For Plasticizer HENGSHUI JINGHUA CHEMICAL CO., LTD. , https://www.hegnshuijhchem.com
Second, after work 1, carefully check the health of all parts of the machine tool, cleaning work table, corrections, shields, etc. at the ash. Remove dust from the ash tank. 2. Clean the surrounding environment of the machine tool. 3, stop, processing parts do not stay in the machine, cut off the power. 4. Carefully fill in the shift record and other records. 5, cleaners, folders, measuring tools. The parts are homed. First-level maintenance The machine is operated for three months to perform a level of maintenance. First, the power supply is cut off and then the maintenance work is performed.
How to maintain CNC internal grinder in daily work?
First, before the work 1, carefully check the health of all parts of the machine tool, cleaning the work table, corrections, shields, etc. at the ash. Remove dust from the ash tank. 2. Check whether the operating handle, switch and knob are in the correct position, whether the operation is flexible, and whether the safety device is safe and reliable. 3. Turn on the power supply and check if the grinding wheel is loose. The empty vehicle runs at low speed for 2-3 minutes. Observe whether the operation status is normal. If there is any abnormality, check or report the shutdown. 4. Check whether the height of the liquid level in the oil standard is appropriate. If the oil level is insufficient, add enough oil as required. 5, manual refueling gun for the lubrication of the machine tool points, pay attention to observe the machine parts of the moving parts with or without oil, especially the guide rail surface, so that it maintains good lubrication, oil flow. 6. Check that the lubrication is smooth and good, that the electrical system and all parts of the machine are operating properly, and that they can start working.