Hcf Cable Fire Resistance Tester Equipment of Standard IEC60092

1. Induction: Is used to test the high temperature performance of the coast, the ship and the oil refinery power line or the control line in the oil or natural gas combustion

1. Standard:

1. NEK 606 :cable without halogen or anti mud test for marine equipmentIEC 60092-350:electrical device on board-Part 350:low voltage marine power cable(general structure and testing requirements)IEC 60092-351:electrical device on board-part 351;marine power cable insulation materialIEC 60092-352:electrical device on board -part 352;cable device for low voltage power systemIEC 60092-353:electrical device on board -part 353:electrical device on board-part 353;single core or multi core cable for the compression of solid insulation,the voltage  range is 0.6/1-1.8/3kvIEC 60092-354;electrical device on board-part 354;single core and three core cable for the compression of solid insulation,voltage range is 6kv-30kvIEC 60092-359:electrical device on board-part 359:marine power cable and communication cable sheath materialIEC 60092-376(2003-05):electrical device on board-part 376:150/250 v cable control and instrument circuitIEC 60228:insulated cable conductor IEC 60331-11/21/25:fire resistance of cable

1. Features:

1. use DAQ system control MFC(quality flow controller)&frequency converter ,in order to control the air and gas supply of the burner so that it can reach the standard temperature.The interior of the box body is composed of an insulation board which is resistant to heat up to 1400 ºCThe burner cover have ON/OFF and start stop button ,it is convenient for the user to operate.Install automatic ignition system ,it is convenient for use and ensure user securitySeparate control standard can control power inputDAQ system can finish test automatically and print test data

Specifications:

1. model: PX-02-011size:1800*1250&1500mm(w*d*h) size of control plate:600*750*1600mm(w*d*h)power supply :AC 220V,50/60HZ,15A(additional withstand voltage)weight:250kg

1. instruction:can supplygas exhaust:30m3/min miniumtools:compressed air,propane gas,vacuum cleaner,computer
    

Anchorage Frame

A Tower Crane anchorage frame is a structural component used to secure a tower crane to the ground or a building during its operation. It is typically made of steel and designed to withstand the high loads and forces exerted by the crane.

The anchorage frame consists of a base plate or foundation, which is securely attached to the ground or building structure. It also includes vertical support beams or columns that provide stability and strength to the frame. These columns are connected to the base plate and extend upwards to support the tower crane.

The anchorage frame is designed to distribute the loads from the crane's operation evenly and safely to the ground or building structure. It must be able to withstand the weight of the crane, the loads lifted by the crane, wind forces, and other external factors.

The design and construction of a tower crane anchorage frame must comply with local building codes and regulations. It is typically engineered by a structural engineer to ensure its strength and stability.

Proper installation and regular inspections of the anchorage frame are essential for the safe operation of a tower crane. Any signs of damage or deterioration should be addressed immediately to prevent accidents or structural failure.

Jacking Part Anchorage Frame,Tower Crane Anchorage Frame,Mast Section Anchorage Frame,Anchorage Frame For Tower Crane,Tower Crane Anchor

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com