4-6 cubic mixer truck information 1 〠mixer truck configuration  The mixing tube Tube material : Q345A-5 ( Manganese steel,5mm chickness ) Blade material : Q345A-4 ( Manganese steel,4mm chickness ) Head materials : Q345A-8 ( Manganese steel,8mm chickness ) Mixing volume : 4 or 6 cubic Subframe The main beam : 140mm×80mm (flat square tube) The front and back use overall box structure,that let it be torsional, flexural and tensile properties. The front and back and vice beam using split connection (domestic advanced level) Feeding and unloading equipment Make up with the composition of the feed hopper, a hopper, chute, Vice chute bracket, lockingframe. Feeding speed : ≥2.7 cubic /min Unloading speed : ≥2 cubic/min Residual rate : <1.5% Operating system Operating system  make up with the controller, the linkage shaft, flexible shaft and linkage, mainly to control the speed and direction of rotation of the mixing tube. Operating system for the hard-operation can be realized around the vehicle cab in three directions the position of the Mixing tube. Hydraulic system The hydraulic system configuration (reducer, variable displacement piston pump and motor) can be used to import or domestic parts, hydraulic system uses a closed hydraulic circuit. Electric system The electrical system includes a cooling fan control section, sun lamp, marker lights Water supply system Water supply system consists of a pressure tank , water gun, water pipes, valves and other components. Tank volume of about 550 liters, the use of pressure water supply. Guardrail There is a security fence and the fender on the both sides. There is a fender on the behind. Price for 4 cubic Domestic main components:53000RMB Import main components: 78000RMB ( Configuration Germany Rexroth hydraulic motor Model:REXFM90-TG100-ZF/P5300, hydraulic pump, Germanmining Evry speed reducer, domestic Yantai Moonradiator. ) Price for 6 cubic Domestic main components: 67000RMB Import main components :92000RMB ( Configuration Germany Rexroth hydraulic motor Model:REXFM90-TG100-ZF/P5300, hydraulic pump, Germanmining Evry speed reducer, domestic Yantai Moonradiator. )
The Hydraulic Copper Metal Baler is used for cold press metal scraps within 6-8mm in thickness under most circumstance. The processable material includes scrap steel, waste containers and disintegrated vehicle shell etc. After cold pressing into block, it is convenient for storage and transportation or putting into furnace. Hydraulic Metal Baler working principle: The metal scraps and other materials are placed in the workbin. The hydraulic cylinder works to suppress the pressure. The baled material is compressed and formed into various metal blocks.
Copper Shavings Baler, Copper Turnings Baler, Waste Copper Baler, Copper Wire Baler, Copper Scraps Baler Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.eco-balingmachine.com
4-6 Cube Mixer Technical Information English Version