YCB series arc pump is suitable for conveying lubricating oil without solid particles and fibers, non-corrosive, temperature not higher than 80 ℃ and viscosity of 5 × 10-6 ~ 1.5 × 10-3m2 / s (5-1500cSt) or Other liquids of a similar nature as lubricating oils, as well as for hydraulic drive systems. Application: Search Keyword: More Pump Technical Articles Stainless Steel Wire Production Line
Stainless steel wire drawing machine line
(5.5mm-1.2mm)
Stainless steel wire production machine line
A: 1. The process flow (ï¿ 5.5 mm) rod for film coating (with dryer)1#
2 vertical pay-off ---LZ6/600 straight line drawing machine (to) -- ï¿ 3.0mm ----SG740H-spool take up
3 rod for film coating (dryer)2# ------straight line drawing machine LZ8/450 (to ï¿ 1.2mm) - SG740 take up machine
B Introduction of Equipment,
1.LZ6/600 straight drawing unit performance parameters
Product name: LZ6/600 straight drawing machine
2 equipment:
(1) vertical pay-off stand
(2) LZ6/600 straight line drawing machines
(3) SG740 h-wheel take-up machine
(4) man-machine interface screen
(5) set of control cabinets
3 work scope: (1) inlet diameter: 5.5mm
(2) inlet line intensity: ≦ 800Mpa
(3) material: stainless steel wire, etc
4 drawing speed: (1) the highest speed: 6 meters per second (2) commonly 6.5 meters/SEC speed
7. (1) the main speed form of control system adopts the production Inovance inverter
(2) the secondary circuit USES German production PLC controller, so the automation degree of machine is greatly improve the fault protection.
(3) process parameters are input by the touch screen, the operation is simple, high reliability, drawing process broad, and can be easily realized to die jump drawing
8 other functions: (1) fixed function with preset
(2) automatic protection function when broken wires
(3) in length automatic stop function
(4) emergency stop acuities (less than)5 seconds
9 take-up machine
Stainless Steel Wire Production Line,Stainless Steel Wire Drawbench Machinery,Stainless Steel Wire Processing Line,Stainless Steel Wire Drawing Machinery Jiangyin Wanyi Machinery CO.,Ltd , https://www.wydrawmachine.com
In the oil delivery system can be used as transmission, booster pump;
In the fuel system can be used as delivery, pressure, jet fuel pump;
In the hydraulic transmission system can be used as a hydraulic pump to provide hydraulic power;
In all industrial areas, can be used for lubricating oil pump.
YCB series arc pumps for the scope