Measurement Instruments,New Butane Gas Canister Filling Machine,Popular Automatic Aerosol Filling Instructions,New Semi-Automatic Aerosol Gas Filling Machine Jinhu Fuda Machinery Co.,Ltd , https://www.efuda.com
The main features:
1. Ultra-small size, ultra-lightweight, single person can drive, two can be transported, the host and all accessories can be easily shipped with a micro car.
2. Easy to operate, direct foaming with one button, perfect structure and easy maintenance.
3. Taking into account large-area and scattered construction, it is possible to combine multiple large-scale constructions and to independently complete scattered construction tasks.
4. The working voltage is 380V, stable and reliable; 220V working voltage is also optional, which is more applicable.
Application scope:
1. Sporadic Home Furnishing Floor Heating Construction
2. Small and medium area roof insulation
3. Prefabricated insulation profile processing
4. Large-volume wall, waste or other hollow cavity filling
5, fire door core prefabrication
6, refractories prefabrication
7. Wall-filled foam concrete processing
8, foam concrete insulation sporadic project
9, small crafts injection molding
Features:
1, using compressed air as the power, foaming time is short, the foam is an independent mesh foam, bubble diameter of 0.2-0.6mm, foam rich, fine. Bubble production volume, up to 20-50 m3 per hour.
2, small size, covers an area of ​​only 0.5m2, exquisite and compact.
3, light weight, the whole weight of less than 70kg; can be easily moved or lifted to the floor construction.
4, easy to operate, the boot can bubble out, without adjustment, 5 minutes to operate skilled.
5, fine and uniform foam, shaped like cheese. All kinds of foaming agents can be used at home and abroad.
6, the power supply can be determined according to customer requirements. Can reduce noise, reduce the amount of foaming agent, and can reduce electricity consumption.
7, widely used: foam concrete cutting, lightweight wallboard, fire door core chlorine magnesium oxide cement foam and glass magnesium composite duct production line and other environmental protection foam auxiliary equipment, with a large amount of foam, easy to use and flexible advantage.
Compared with domestic foaming machines of the same kind, the outstanding feature of the machine is that the prepared foam has a small water content, ie, the foam has a small density. The weight of foam per litre can be controlled below 50g at room temperature and down to 20g. The foam produced by the general foaming machine in the market has a large moisture content, and its density is mostly 80 to 100 g per litre. The water content of the foam is actually a foaming agent solution that has not been foamed. Foam has a large amount of water (ie, a high density) and its harm is great. First, the foaming agent solution that has not been foamed is wasted, increasing the amount of foaming agent; second, a large amount of water in the foam enters the cement slurry, reduces the density of the foamed cement, and causes pores when the excess water evaporates. The thermal conductivity increases, the water absorption increases, and the compressive strength decreases, which seriously affects the quality of the foamed cement. Therefore, the foam density is an indicator of the foam quality (usually expressed in terms of foam density or bleeding volume). The foam density is mainly determined by the performance of the foaming machine.
When some customers purchase, they only look at the output and do not look at the quality of the foam. This is very wrong. Some models have high output, mainly due to the large amount of water in the water and the foam in the water. The output should be increased with the premise of maintaining the quality of the foam.
Therefore, it is a good foaming machine that is both high in output and high in quality. This model fully meets this technical requirement.
Second, other advantages:
1, large amount of foam, up to about 30 m3 per hour
2, easy to control, a press button to bubble, without complex adjustments, 10 minutes can learn to control operation, use very convenient.
3, fine and uniform foam, foam like clouds
4. Good adaptability to foaming agent viscosity. The general foaming machine is only suitable for low-viscosity foaming agents. The machine is also very suitable for high-viscosity foaming agents and is excellent in foaming.
Â
Sales Hotline Service Online QQ 
Specializing in the production of small cement foaming machines, small horizontal cement mixers, Tianda brand, Hebei hot products.
Our main production: small foaming machine, medium and small-sized mixing tanks, feeding tanks for mixing tanks, and cement foaming mortar pump. Foam concrete complete equipment, another sales of equipment accessories.