Adhesive door frame edges need to be selected according to the material, generally you can use instant glue, slow-dry glue, nail-free glue, UV shadowless glue, swelling glue, etc.
UV shadowless glue belongs to two kinds of bonding. It is only effective if it is a transparent part. The bonding strength is also relatively good, and it dries quickly. After this glue is irradiated by ultraviolet rays, the reaction will be strong and the efficiency is very high. .
Door Frame Cover,High Strength Hot Glue,Hot Melt Pellets,Industrial Hot Glue GUANGZHOU INTERNET WOOD GLUE MANUFACTURER CO. LTD. , https://www.hotmeltadhesiveiwg.com
Â
1.PC control type and auto bending,can be used to bend all kinds of aluminum,stainless steel,galvanize plate,iron,brass etc.
2.High precision machining,feeding speed can be 5-20Meter/Min and precision can be 0.05mm.
3. based on the way of the processing material, self-adjusting process parameters, so that it can match with a variety of engraving machines and cutting machine, meet a variety of complex embedded process accuracy as much as possible.
4. The Max. Processed width can be 10-160mm,other width can be custom-made according to users' demand.
5. Widely range of applications,can process machining strip and various 0-1.5mm aluminum,galvanized steel,iron sheet etc metal coil.Highly grade molding,the processing of finished products and raw file length deviation less than 0.1mm and can ensure the consistency with the same file repeated production.
6. Excellent man-machine exchange interface,simple configuration,touch screen operation. Simply input the processing files,graphic design, then can realize the automatic processing and cutting.
7. Unique 3D processing simulate technology,can display the two dimensional design documents in 3D effect,supplemented by translation,rotation,zoom and other functions,enable users have a multi-angle,fully observation and monitoring of the working processing.
Technical Data:
Model
PEL-200
Control Type
PC control type
Bending Type
Auto bending
Bending Materials
Can bend all kinds of Aluminum,Stainless Steel,Galvanize Plate,Iron etc
Max. Processed Width:
10-160mm
Max. Processed Thickness
Stainless steel: ≤0.8 mm
Aluminum: 0.5 -Â 1.5 mm
Carbon Steel: 0.5 -Â 1.0Â mm
Mild Steel: 0.5-1.5 mm
Galvanize Plate: 0.5-1.0Â mm
Iron Steel: 0.5-1.5 mm
Voltage:
AC 220V,50HZ
Size:
1740x760x1450mm
Weight:
400 kgs
Import File Format
PLT
Export File Format
DAT
Feed speed:
5-20 Meter /Â Min
Precision
0.05mm
           Â
Â
Â
1.PC control type and auto bending,can be used to bend all kinds of aluminum,stainless steel,galvanize plate,iron,brass etc.
2.High precision machining,feeding speed can be 5-20Meter/Min and precision can be 0.05mm.
3. based on the way of the processing material, self-adjusting process parameters, so that it can match with a variety of engraving machines and cutting machine, meet a variety of complex embedded process accuracy as much as possible.
4. The Max. Processed width can be 10-160mm,other width can be custom-made according to users' demand.
5. Widely range of applications,can process machining strip and various 0-1.5mm aluminum,galvanized steel,iron sheet etc metal coil.Highly grade molding,the processing of finished products and raw file length deviation less than 0.1mm and can ensure the consistency with the same file repeated production.
6. Excellent man-machine exchange interface,simple configuration,touch screen operation. Simply input the processing files,graphic design, then can realize the automatic processing and cutting.
7. Unique 3D processing simulate technology,can display the two dimensional design documents in 3D effect,supplemented by translation,rotation,zoom and other functions,enable users have a multi-angle,fully observation and monitoring of the working processing.
Technical Data:
Model
PEL-200
Control Type
PC control type
Bending Type
Auto bending
Bending Materials
Can bend all kinds of Aluminum,Stainless Steel,Galvanize Plate,Iron etc
Max. Processed Width:
10-160mm
Max. Processed Thickness
Stainless steel: ≤0.8 mm
Aluminum: 0.5 -Â 1.5 mm
Carbon Steel: 0.5 -Â 1.0Â mm
Mild Steel: 0.5-1.5 mm
Galvanize Plate: 0.5-1.0Â mm
Iron Steel: 0.5-1.5 mm
Voltage:
AC 220V,50HZ
Size:
1740x760x1450mm
Weight:
400 kgs
Import File Format
PLT
Export File Format
DAT
Feed speed:
5-20 Meter /Â Min
Precision
0.05mm
           Â
Â
When repairing viscose, to avoid applying glue on a large area, you only need to divide the door frame into four equal parts, and point five points. The two ends and the middle must be glued, and then installed Go back and hold it for a few minutes, and after letting go, the door frame edge will not fall off.
Different glues have different effects, and you should choose and use them according to the material and specific conditions of the door frame edge.
The most convenient way is to use instant glue. After the glue is applied, it can stick together immediately, and the effect is relatively good. The effect is very good for metal and plastic parts. But this kind of glue is easier to paint, and it is easy to have white edges around it after a long time.
The filling effect of slow-drying glue is good, and it will not cause white fog, and at the same time, it will not appear embrittlement. The longer it is used, the better the adhesion will be, but the drying will be slower.
In the case of sticking wooden doors, you can use nail-free glue. Before using, clean the surface to ensure that the surface is free of oil and dust, and then use a sealing gun to squeeze out the glue.
Sign Making Channel Letter Fabrication Bender Machine
Model NO.: PEL-200
Product Name: Channel Letter Fabrication Bender Machine
After Sales Service Scope: Overseas
Material: Stainless Steel, Aluminum
Trademark: Perfect Laser
Transport Package: Wooden Case
Specification: ISO 9001 & CE
Origin: China
HS Code: 8462219000
Model NO.: PEL-200
Product Name: Channel Letter Fabrication Bender Machine
After Sales Service Scope: Overseas
Material: Stainless Steel, Aluminum
Trademark: Perfect Laser
Transport Package: Wooden Case
Specification: ISO 9001 & CE
Origin: China
HS Code: 8462219000
Sign Making Channel Letter Fabrication Bender Machine
Features:
8. With precision automatic calibration function, based on the way of the processing material, self-adjusting process parameters, so that it can match with a variety of engraving machines and cutting machine, meet a variety of complex embedded process accuracy as much as possible.
Sign Making Channel Letter Fabrication Bender Machine
Features:
8. With precision automatic calibration function, based on the way of the processing material, self-adjusting process parameters, so that it can match with a variety of engraving machines and cutting machine, meet a variety of complex embedded process accuracy as much as possible.