High temperature cold storage walk in freezer, medium temperature cold storage walk in freezer, low temperature cold storage walk in freezer. The polyurethane core material with good performance and the sandwich-type library board made of color steel plate/stainless steel plate on the outside can reduce the heat transfer caused by the temperature difference between the inside and the outside to achieve the maximum efficiency of the freezing and refrigeration system. Cold Room,Freezer Room,Cold Room Chiller,Walk In Cold Rooms ZHENGZHOU KAIXUE COLD CHAIN CO., LTD. , https://www.supersnowfreezer.com
Product Name: Plastic Moulds/molds
Product material: ABS, PP, PE or as per customer requirement.
Plastic Moulds/molds cavity: As per customer requirement
Plastic Moulds/molds size: Depends on your design.
Plastic Moulds/molds material: P20, 718...
Plastic Moulds/molds life: 800k shots
Plastic Moulds/molds Runner system: Cold runner or hor runner
Plastic Moulds/molds features: Good quality
Injection cycle time: 60seconds
Tooling time: 20days
MELEE MOULD Co., Ltd service process for Plastic Moulds/molds
1. Design/sample: Product, mould, etc.
2. Discussion: Mould material, cavity number, price, runner, payment, etc.
3. Order placed: According drawing or your samples.
4. Design mould: We will send mould design to customer for confirmation
5. Mould tooling: We start to make mould after mould design confirmed
6. Mould processing: Send pictures to customer every week for the customer to know the mould processing.
7. Mould shot trial: Send mould shot trial samples to customer to confirm mould quality
8. Delivery: Ship mould after mould quality confirmed.
Product Name
Plastic Moulds/molds
Size
 800x450x500mm
Product description
as per customer requirment
Crate Mould/Mold cavity
1cavity
Crate Mould/Mold size
1050x650x700mm
Suitable machine
Around 650T
Crate Mould/Mold material
P20, 718
Crate Mould/Mold life
800k shots
Crate Mould/Mold runner system
Cold runner or Hot Runner
Ejection system
 Ejector BAR
Crate Mould/Mold features
Good quality
Injection cycle time
60Â seconds
Tooling time
20days
Side Table Design Plastic Crate Mould
Model NO.: MELEE MOULD-575
Runner: Hot Runner
Design Software: UG
Installation: Fixed
Standard: HASCO
Customized: Customized
Size: as Your Request
Mould Material: P20,718...
Mould Life: 800k Shots
Tooling Time: 20days
Trademark: MELEEMOULD
Specification: SGS
Origin: Huangyan, Taizhou
HS Code: 8480710090
Detail description of Plastic Moulds/molds.