Secondary Bending Forming Stamping for Medical Equipment

Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm
Customized: Customized
Lead Time: 30 Days
Tolerance: +/- 0.002
Origin: China
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm
Customized: Customized
Lead Time: 30 Days
Tolerance: +/- 0.002
Origin: China
Application:

Medical equipment wire harness terminals.

Secondary Bending Forming Stamping for Medical Equipment

Caracteristics:
 
Material Becu
Material Thickness 0.08mm (.003″)
Type Female
Plating Plated on both sides
Plating thickness 10u"
Pitch 1.6mm
Stamping Speed 300SPM
Dimension Tolerence +/-0.01mm

-High level of precision tooling processing, cutting oil required, PG, JG high- precision machining equipment.
- Product with two sets of dies, blanking completed in two steps.
- Product after punching the first surface, The first face punching products, in order to product efficiency , the need to strip after punching a specified area on both sides were plated ( film coated ), gold-plated and then bending forming , to prevent bending when the terminal is part abrasions, All punching and bending parts oil to be special treatment.

Company Profile:

Dongguan Huisoelec Limited excels at high-volume production of tight-tolerance precision metal stamping. Through proven manufacturing processes and industry-leading technology, we are able to create innovative solutions for your most complex component needs. Our precision stamping begins with high quality progressive dies.

All of our presses are equipped with electronic sensors, allowing us to run production consistently and safely at maximum speeds with minimum downtime.

Straight-sided presses ranging from 25 - 260 tons, imported from Taiwan and Japan, equipped with precision feeders, are capable of running speeds from 60 - 1500 spm. Dimension tolerence can be controled within +/-0.007mm, blanking thickness ranges from 0.04mm to 3.2mm; Piloting hole is φ0.08 min.

Yamada Dubby presses ranging up to 30 tons; ideal for coining difficult, tightly toleranced components in materials such as stainless steel, low-carbon steel, and copper alloys.  Parts may be ordered unplated, preplated, or postplated, packaged in bulk or on reels. Part quality strictly controled by our experienced QC staffs.

Not sure your products requirements? Directly send us all the information you know(CAD/3D drawing/Solid picture), the engineer team will provide the best solutions. Contact us now!

 

www.huisoelec.com Application:

Medical equipment wire harness terminals.

Secondary Bending Forming Stamping for Medical Equipment

Caracteristics:
 
Material Becu
Material Thickness 0.08mm (.003″)
Type Female
Plating Plated on both sides
Plating thickness 10u"
Pitch 1.6mm
Stamping Speed 300SPM
Dimension Tolerence +/-0.01mm

-High level of precision tooling processing, cutting oil required, PG, JG high- precision machining equipment.
- Product with two sets of dies, blanking completed in two steps.
- Product after punching the first surface, The first face punching products, in order to product efficiency , the need to strip after punching a specified area on both sides were plated ( film coated ), gold-plated and then bending forming , to prevent bending when the terminal is part abrasions, All punching and bending parts oil to be special treatment.

Company Profile:

Dongguan Huisoelec Limited excels at high-volume production of tight-tolerance precision metal stamping. Through proven manufacturing processes and industry-leading technology, we are able to create innovative solutions for your most complex component needs. Our precision stamping begins with high quality progressive dies.

All of our presses are equipped with electronic sensors, allowing us to run production consistently and safely at maximum speeds with minimum downtime.

Straight-sided presses ranging from 25 - 260 tons, imported from Taiwan and Japan, equipped with precision feeders, are capable of running speeds from 60 - 1500 spm. Dimension tolerence can be controled within +/-0.007mm, blanking thickness ranges from 0.04mm to 3.2mm; Piloting hole is φ0.08 min.

Yamada Dubby presses ranging up to 30 tons; ideal for coining difficult, tightly toleranced components in materials such as stainless steel, low-carbon steel, and copper alloys.  Parts may be ordered unplated, preplated, or postplated, packaged in bulk or on reels. Part quality strictly controled by our experienced QC staffs.

Not sure your products requirements? Directly send us all the information you know(CAD/3D drawing/Solid picture), the engineer team will provide the best solutions. Contact us now!

 

www.huisoelec.com

Pool Float With Water Gun

About ThePool Float With Water Gun
[Material]: ordinary PVC or 6P environmental protection PVC (without phthalates)
[Color]: customized according to the international Pantone color card number
[Thickness]: It can be customized according to the thickness required by the customer
[Printing]: Four-color screen printing (monochrome, multi-color and patterns with gradient colors can be printed)
[Features]: It can be produced according to the specifications required by customers, suitable for children swimming, playing in the water, etc.
[Packing]: A single house is put into PE bag or color box (also can be packed according to customer requirements)

[Quality]: Each process has a special QC inspection, and the inflation inspection is carried out before packaging, and the product qualification rate is over 99%.


Features of water inflatable floating toys
*PVC inflatable products are airtight airbag structure, soft and comfortable to use.
* Equipped with a safety inflatable valve (mouth), which can be fully charged at one time, and can be exhausted for multiple uses, which is durable.
* Fold and pack after deflation, light and convenient, easy to carry, does not take up space when storing
* The surface of the product is smooth, easy to clean, clean and hygienic.

Inflatable Floating Hoop,Swimming Pool Floats,Inflatable Pool Toys,Pool Games

P&D Plastic Manufacture Co., Ltd , https://www.jmpoolfloat.com