Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
NO.
ITEM
PROJECT
1
Equipment Model
XY-7
XY-8
2
Door Model
Full Open Door
Full Open Door
3
Suitable Raw Materials
Rubber/Plastic Products
Rubber/Plastic Products
4
Structure
Horizontal Type Revolves
Horizontal Type Revolves
5
Reactor Size
Φ2200*6000mm Φ2600*6600mm
Φ2200*6000mm Φ2600*6600mm
6
Capacity for One Batch
5-6Mt; 8-10Mt
5-6Mt; 8-10Mt
7
Oil Yield of Tires
40%-45%
40%-45%
8
Work Pressure
Normal Pressure
Normal Pressure
9
Reactor Rotation Speed
0.4R/M
0.4R/M
10
Fuels Choice
Coal, Wood
Coal, Wood, Gas, Oil
11
Power
18KW/H
18-25KW/H
12
Cooling Method
Water Cycling
Water Cycling
13
Type of Drive
External Annular Gear
External Annular Gear
14
Heating Method
Direct
Direct
15
Type of Installation
With Foundation
With Foundation/Integrated Base
16
Noise dB(A)
≦85
≦85
17
Operation Mode
Intermittent Operation
Intermittent Operation
18
Total Weight(MT)
25-40
25-40
19
Installation Space Required
30m*10m
30m*10m
20
Manpower
3~4/batch
3~4/batch
21
Shipment
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Ф2200×6000=1*40HC+1*40FR
Ф2600×6600=2*40HC+1*40FR
Waste Plastic Pyrolysis Plant Waste Plastic Pyrolysis Plant,Plastic Pyrolysis Plant,Pyrolysis Of Plastic,Waste Plastic Pyrolysis Oil Plant Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com
material
Grade AÂ Â Wc-10 tungsten carbide alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness
HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder
High wearing resistance,high corrosion resistance and high temperature resistance
Apply to
Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic
material
Grade BÂ Ni-20 Ni-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc
The index of hardness
HRC60-63,the service life of 4-5 times longer than the nitrided one
Characteristics of alloy powder
High corrosion resistance,high wearing resistance and high temperature resistance
Apply to
PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc
material
Grade C Fe-30 Fe-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Fe,C,Si,Cr,B,Mo,Ni, Co,etc
The index of hardness
HRC59-61,the service life of 3-5 times longer than the nitrided one
Characteristics of alloy powder
Wearing and corrosion resistance
Apply to
Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
Â
material
Grade AÂ Â Wc-10 tungsten carbide alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Wc(50%-60%),C,Si,Cr,B,Ni,Mo,Co,etc
The index of hardness
HRC62-65,the service life of 5-6 times longer than the nitrided one
Characteristics of alloy powder
High wearing resistance,high corrosion resistance and high temperature resistance
Apply to
Nylon plus 30% - 50% glass fiber, bakelite, magnetic powder, ceramic powder, aluminum magnesium powder, iron powder, LCP and halogen-free flame retardant plastic
material
Grade BÂ Ni-20 Ni-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Ni,C,Si,Cr,B,Mo,Co,Wc(20%-25%),etc
The index of hardness
HRC60-63,the service life of 4-5 times longer than the nitrided one
Characteristics of alloy powder
High corrosion resistance,high wearing resistance and high temperature resistance
Apply to
PE, PC, PVC, LCP, acrylic, transparent plastic, halogen free flame retardant plastic, corrosion resistance of resin plastic, etc
material
Grade C Fe-30 Fe-based alloy
Processing range
Inner diameter : φ16mm-φ450mm ,effective length to 9000mm
Processing technic
Centrifugal casting,alloy layer reach 1.5mm-2mm one side,maximum reach 3mm-6mm one side
Alloy powder composition
Fe,C,Si,Cr,B,Mo,Ni, Co,etc
The index of hardness
HRC59-61,the service life of 3-5 times longer than the nitrided one
Characteristics of alloy powder
Wearing and corrosion resistance
Apply to
Nylon plus 10% -30% glass fiber, PC plus glass fiber, PVC plus calcium powder, recycled plastics processing, etc
Product Display
Equipment Display
Processing
Packing&Delivery
Contact Us
 
Screw and Barrel for Plastic Recycling Machine Spare Parts
Origin: Zhoushan
HS Code: 84779000
Origin: Zhoushan
HS Code: 84779000
Production DescriptionÂ
Â
Â
Â