Sanding machine fault handling method

The greatest economic benefits are only possible if the daily troubleshooting of the sand making machine is done properly:

The sand making machine has a large swing:

1) The wear parts on the impeller are seriously worn

2) Feeding size is too large

3) Impeller flow path has obstructions

4) Replace consumables

5) Reduce the feed size

6) Remove the obstruction

Sand making machine product size is too large:

1) The triangle is too loose

2) Tighten the V-belt

Sand making machine: The idling resistance is too large:

1) Sealing the inner cover of the bearing

2) Open the upper seal cover to remove

Sand making machine bearing heat:

1) lack of oil or dust

2) Bearing damage

3) Refueling or cleaning the bearings

4) Replace the bearing

In the Sand (sand making machine) there is the sound of metal collide:

1) Lining or impeller wearing parts fall off

2) Retighten

PLASTIC TRAY

Plastic Serving Trays,Large Plastic Trays,Disposable Serving Trays,Plastic Lap Tray

SHANGHAI WELLONG IMPORT AND EXPORT CO., LTD , https://www.shanghaifloralfoam.com