S&A CW-6200 water chiller with 2P cooling capacity is used to cool card laminating machine by an Indian customer

All of the VIP cards, IC cards and the various cards that can be found everywhere in our daily life are prepared through the lamination by a laminating machine. However heat will be generated during the operation of a large-scale laminating machine, which will have to be cooled with an industrial water chiller. It had been observed that S&A water chiller was exhibited together with the customer`s laminating machine on a trade show.
One of our customers from India also wished to purchase an S&A water chiller to cool their five layer card laminating machine. However the problem about the matching of the card laminating machine with an industrial water chiller came up immediately. This Indian customer trusts S&A very much and they directly provide the technical parameters of the card laminating machine to S&A for the model selection. The customer finally ordered CW-6200 water chiller with 2P cooling capacity as per the recommendation of S&A.
With up to 2P cooling capacity and ±0.5℃ precisely temperature control, S&A CW-6200 water chiller has the main features as below:
1. Two temperature control modes applicable to different occasions; multiple setting and fault display functions;
2. Multiple alarm functions: compressor time-delay protection; compressor overcurrent protection; water flow protection and over high / low temperature alarm
3. Compliant with multi-nation power supply specifications, CE certification, RoHS certification and REACH certification;
Please contact us at and we shall offer professional model selection to you in the first place, if you also have trouble in selecting a water chiller with proper cooling capacity. S&A water chiller is worthy of your trust in terms of quality and after-sales service.
For the center of an industrial water chiller---condenser, S&A has invested millions of money in the equipment for the production and made strict control on a series of processes, including fins, bends and welding etc to secure the quality of condenser. Meanwhile, with the introduction of welding robots, the welding procedure has been significantly improved and perfected, which has efficiently prevented the machinery breakdown caused by solder skips to better secure the stable quality of S&A water chiller. Also with the introduction of IPG fiber laser cutting machine for the cutting of external metal plates on the water chiller and the punching of holes on the machine parts, it has not only improved the work efficiency and technology, but also enhanced the appearance of S&A water chillers.
With the gradual development of modern mechanical automation, S&A is dedicated to growing into a modern high-tech enterprise with high efficiency and high quality to keep in step with the times.
The technical parameter of CW-6200: http://Products/ChillerCW62005100Wco.html