SF-200 is a Hand belt type resistance Forming Machine which is the best selection for mass production.Easy adjustment,operation and long life.
SF-201 is the same as SF-200,Beside above ,they are Loose Tape resistance Former suitable for vertical or horizontal shaping of resistors and diodes.
SF-202Component bending forming machine is bulk, with resistance and diodes are available.Foot cutting, bending can be strengthened, foot long span can be adjusted.
SF-208FB Axial automatic resistor machine has three Models for Processing Different Type of Packing.
SF-206 The bulk Resistor Former has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.
SF-208 Equipment K Type Resistance Molding Machine has three Models for Processing Different Type of Packing.â‘ Loose packed Model(SF-208-FA).â‘¡Taped Model(SF-208-FB).â‘¢ Loose packed/taped combinative Mode(SF-208-F).
SF-206MB The axial lead former m type has three models each for both M&C types.The difference are listed as follows:â‘ SF-206-MA;SF-206-CA for loose packed components â‘¡SF-206-MA;SF-206-CB for taped packed components â‘¢SF-206-MA;SF-206-C for using on both taped and loose packed components.It is also means automatic resistor forming m machine.
Resistance Molding Bending Machine,F Resistor Cutting Machine,Component Cutting Forming Machine,Components Lead Cutting Machines SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com
Soil analysis is the most accurate and reliable means of determining fertilization and lime usage. It is very important to determine the soil fertility and pH before planting. If necessary, lime and fertilizer can be applied to the soil. Unless the limit is reached, soil pH is generally not a limiting factor for seabuckthorn planting. The optimum pH should be 515~710. If the pH of the soil is too low, limestone containing dolomite can be applied for neutralization. This mineral is also recommended because it is rich in essential elements that are often lacking in plants - magnesium. Quicklime, corrosive lime, and hydrated lime are not recommended for agricultural land.
Increased yield requires proper nutrient levels to ensure flower bud differentiation, fruit size and quality. The fertilization of mature forests is as important as fine pruning. Therefore, using a portable soil moisture meter to measure soil moisture content and make water recharge measures is very effective. Sampling and analysis of the leaves at the early flowering stage can determine the requirements for different nutrients of seabuckthorn. The output depends on the species, configuration, tree condition and age, as well as the grower's management and fertilization. Seabuckthorn can be used to fix nitrogen through the roots. However, a small amount of nitrogen fertilizer or a little more delayed nitrogen fertilizer is beneficial to the soil after planting.
Irrigation is essential in continuous drought, especially in the flowering and fruiting stages. Surface water, whether from rivers, lakes, reservoirs or farms, is often better than groundwater because of its higher water temperature and the presence of small amounts of solutes such as salt. Appropriate seabuckthorn soil moisture content should be about 70%, the lack of soil moisture will cause the leaf area to shrink, reduce fruit yield. The application of portable soil moisture meter has a significant effect.
Portable Soil Moisture Analyzer for Analysis of Soil Moisture in Seabuckthorn Woodland
A good growing environment is the guarantee of the yield and quality of seabuckthorn. The sandy soil with rich soil, good drainage, and rich organic matter content is a good environment for its growth. In arid and semi-arid regions, water supply problems need to be solved before seabuckthorn can be planted. In Saskatchewan, seabuckthorn plants in shelterbelts are often under stress from insufficient water and nutrients. In industrialized seabuckthorn plantations, cultivation and management, especially soil fertility and moisture, are important. The portable soil moisture meter is designed to provide effective control over soil moisture content and provide more accurate water supply.