Xue also emphasized that Japan’s nuclear accidents further strengthen the concept of safety first, but it will not change China’s nuclear power’s mid-to-long-term strategy. Under the constraint of increasing the share of non-fossil energy in primary energy consumption, China’s nuclear power development is indispensable. According to the established plan, during the “12th Five-Year Plan†period, China will have about 30 nuclear power generating units put into production, nuclear power installed capacity of 40 million kilowatts, nuclear power generating capacity of 320 billion kwh, nuclear power accounted for 2.2% of primary energy consumption, the first three generations The technical nuclear power plant has successfully operated. “The 12th Five-Year Nuclear Power Installation target has not been affected much. The 30 nuclear power projects under construction have all been approved. Once the safety review is passed, construction can be resumed. The construction of unstarted nuclear power plants will be postponed and the country will restart the technical route and Safety assessment." Xue Xinmin said. At present, Yunnan Province is carrying out preparatory work for nuclear power. Assistant Administrator of the Yunnan Provincial Energy Bureau predicts that the ongoing nuclear safety review will delay the nuclear power process by one and a half years. Nuclear power will continue to "actively promote" After the nuclear accident in Fukushima, Japan, the State Council executive meeting immediately demanded a comprehensive safety inspection of China's nuclear facilities; strengthened the safety management of the operating nuclear facilities; comprehensively reviewed the nuclear power plants under construction; and strictly approved new nuclear power projects. After this centralized investigation is completed, domestic nuclear power construction will return to normal. At the meeting on April 28, experts from the Energy Research Institute of the National Development and Reform Commission revealed that the country’s development tone for nuclear power is still “proactively promotedâ€. At present, the initial development ideas are: actively promote the construction of nuclear power in the development of electricity, unify the development of nuclear power technology, pay attention to the safety and economy of nuclear power, adhere to me as the mainstay, cooperate with China and foreign countries, use the market for technology, and introduce advanced foreign technologies. The domestic unified organization digests and absorbs and reinvents itself to realize the autonomy of engineering design, equipment manufacturing and operation management of the advanced PWR nuclear power plant. Our country insists on the use of millions of kilowatts of advanced pressurized water reactor nuclear power plants, and carries out work in three steps: “thermal neutron reactors—fast neutron reactors—controlled nuclear fusionâ€. "On the nuclear power technology route, China will vigorously promote the AP1000 technology, achieve localization of technology, and become the mainstream technology. The probability that the third-generation nuclear power units will be discharged in core fusion and large-scale pollution is lower than that of the 'second-generation plus' units. Active safety system is better than second-generation technology," said Xue Xinmin. At present, there are many types of nuclear power plants in operation, under construction, and planning in China, and it is difficult to unify nuclear power development technology routes. Among them are the third-generation AP1000 technology (Sanmen and Haiyang nuclear power plants), the French EPR technology (Taishan, Guangdong nuclear power plant), and the "second-generation plus" CPR1000 technology. The “second-generation plus†CPR1000 technology is widely used in China, and localization of equipment reaches 60%-70%. The world’s first third-generation AP1000 nuclear power plant, Zhejiang Sanmen Nuclear Power Plant, is also under construction and is expected to be put into operation in 2013. “The previous nuclear power plants were mostly defended against a single natural disaster. Japan's Fukushima nuclear power plant was designed to resist magnitude 8 earthquakes. Under the overlay of multiple factors such as the magnitude 9 earthquake and the tsunami, accidents are difficult to avoid,†said Zhou Tao, a professor at North China Electric Power University. Investment rhythm will slow The basic adjustment of the national nuclear power has not changed, and the local development enthusiasm has not diminished. According to the reporter’s understanding, many inland provinces such as Jiangxi, Hunan, and Anhui are actively operating and are striving to be the first nuclear power plant inland. The written “12th Five-Year Plan†for electricity indicates that the construction of the first inland nuclear power project will begin in 2011 and will strive to put into operation the first inland unit in 2015. According to insiders, the nuclear power watch platform in a certain land inland has already been completed. It was only because nuclear power projects had not been approved and the observatory was idle and rusted. "At this stage, it is time to stop, strengthen nuclear power safety standards, reserve nuclear power personnel, and adjust development plans." Xue Xinmin said. In the past few years, domestic nuclear power has developed rapidly. The China Nuclear Energy Industry Association statistics show that since 2005, China has approved 13 nuclear power projects and 34 units with a total installed capacity of 37.02 million kilowatts. Construction of 28 nuclear power units has been started. The scale of construction is more than 30 million kilowatts, accounting for 40% of the 65 nuclear power units under construction worldwide. The people in the industry are not evasive about the development of too fast, for example, the lack of construction teams, there may be rush time; experienced debugging and operating personnel; lack of some key equipment supply capacity. After the nuclear accident in Fukushima, Japan, the State Council called for the preparation of a nuclear safety plan, adjustment and improvement of the mid- and long-term plans for the development of nuclear power, and the approval of nuclear power projects before the approval of nuclear safety planning, including the implementation of pre-projects. According to industry insiders, the mid- and long-term plans for the development of nuclear power after adjustments will be announced after the investigation and evaluation of the nuclear accident in Japan by the International Atomic Energy Agency. The investigation conclusions will also be included in the plan. Prior to the nuclear power accident in Japan, China basically determined that the installed nuclear power capacity in 2020 was 70-80 million kilowatts. However, it seems that the pace of investment will slow down, and the medium and long-term development goals will also change. The mid- and long-term goal of nuclear power proposed by the Chinese Academy of Engineering's "Strategy for the Development of Mid-term and Long-term Energy (2030, 2050)" is that the total installed nuclear power capacity will reach 70 million kilowatts by 2020, and nuclear power installed capacity will account for 4.6% of the total installed capacity of power; in 2030, it will reach 200 million kilowatts. Nuclear power installed capacity accounted for 10% of total installed capacity; in 2050, it reached 400 million kilowatts, and nuclear power installed capacity accounted for 16% of total installed capacity. Wide base roll up to firmly display your picture!Luxury aluminum alloy wide base with easy to install and easy to operate. Droplet type all aluminum alloy easy to pull tab, fully showcasing high-end; Lightweight and portable, convenient for transportation and carrying. High end luxury, beautiful and stable, meeting the needs of mid to high end customers. Broad Base Roll Up,Wide Bottom Coiling,Wide Bottom Coiler,Broad Base Roll Up Stand SUZHOU JH DISPLAY&EXHIBITION EQUIPMENT CO.,LTD , https://www.jh-bannerstand.com
The roll up support rod is made of high-quality aluminum with a three section design. Stainless steel sleeves are used at the docking point. The water droplet type base is designed with high-quality aluminum alloy polishing and oxidation, which is high-end and atmospheric, highlighting the level. The crossbeam adopts high-quality aluminum alloy polishing and oxidation design, which is easy to install.
Only high-quality products are available on the exhibition stand, worth sharing with you. Suitable for advertising and promotion in stores such as shopping malls, hotels, 4S stores, exhibition halls, etc.
Nuclear power investment will slow down, nuclear power will continue to "actively promote"