Metal bale Dismantling Machine is suitable for the dismantling of various packages of scrap metal, plastic, waste paper, etc. It is mainly suitable for test use in smelters, recycling and processing industries, non-ferrous and ferrous metal smelting industries.
Main Components:
Technical Parameters
Model
Matched power(kw)
Maximum detachable package block(mm)
CBJ-280
22
1000*500*500
CBJ-340
45
1200*600*600
CBJ-400
55
1400*700*700
CBJ-500
90
2000*800*800
CBJ-640
180
2000*800*800
Bale Breaker,Bale Breaker Pilsner,Bale Breaker Top Cutter,Bale Breaker Variety Pack Jiangsu Dalongkai Technology Co., Ltd. , https://www.dlkhydraumatic.com
The wind turbine of the 5MW offshore wind turbine developed by Haizhuang Wind Power has a diameter of 154 meters. It is the longest blade of the same type, with the largest diameter of the wind wheel and the area of ​​the sweeping wind. The power generation is about 9 times higher than that of the same type of fan. %, the scope of application covers more than 90% of current wind farms.
It is understood that in the development process of 5MW offshore wind turbines, sea-mounted wind power dominates the entire design process, adhering to the "trustworthy, reliable, cost-effective, grid-friendly" technical concept, adhere to the "standardization, serialization, modularization" design, In addition to the blades, the various specifications and components can be completely interchanged, and the technological evolution space is appropriately reserved.
CBJ type hydraulic breaker is composed of main engine, hydraulic system, manipulator, butterfly beam, fuel tank, fuel pump and electric motor.
The parameters in the above table are for reference only.
Haizhuang Wind Power 5MW Offshore Wind Turbine Receives CCS Certification
On October 17, the H151-5.0MW offshore wind turbine generator set independently developed by CSIC Heavy Industry Haizhuang Wind Power Equipment Co., Ltd. was awarded the China Classification Society Design Evaluation Certificate. The certification meeting and certification ceremony was held at the 2013 Beijing International Wind Energy Conference and Exhibition. Held, Haizhuang Wind Power became the first complete machine enterprise in China to pass the design and certification of offshore wind turbines of China Classification Society. Qian Jianping, deputy general manager of CSIC, Yang Benxin, assistant to the general manager, Sun Jianke, chief engineer, and Mo Jianhui, vice president of China Classification Society, attended the certification meeting and witnessed the issuance of the certificate.