G550 Decking Floor Metal Roll Forming Machine

Model NO.: roll formers
Yield Stress: 235MPa (33ksi) ~ 350MPa (50ksi)
Roll Forming Speed: 12 M/Minute
Manual Uncoiler: Max. Capacity: 8’000kgs.
Coil Inner Diameter: 508mm
Trademark: WILLING IN′T
Transport Package: Sea Package
Specification: CE Standard, ISO
Origin: China
HS Code: 84552210
1.Components of the Machine:
The roll forming machine consists of 8-ton manual uncoiler, infeed guide, fixed position driven forming stations, cutting equipment, hydraulic station, control console, and manual unload product run out table. 

G550 Decking Floor Metal Roll Forming Machine


2.Technical Parameters: 

Material specification Aluzinc steel and galvanized steel.
Thickness 0.8 mm to 1.5mm.
Main motor power 18.5 kw.
Hydraulic station power 4 kw.
Yield stress 235Mpa (33KSI) ~ 350Mpa (50KSI).
Roll forming speed 12 m/minute.
Cutting tolerance +/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual uncoiler Max. Capacity: 8'000kgs.
Voltage As per customer's request.
Numbers of stations 25 stations.
Type of cutting Roll-formed and length-set profile cutting.

 


3.Material of Main Equipment:

Roller Material High grade S45C forged steel, coated with hard chrome.
Active Shaft Material High grade S45C carbon wrought steel, diameter 85mm.
Electric Elements PLC control console, touch screen and transducer, from Mitsubishi, Japan.
Other elements, from Schneider Electric, Germany.
Cutter blades Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.


4.Process Sketch:

Uncoiling the shee t;  Infeed guiding ;  Roll forming ;  Measure length ;  Cutting the panel ; Panels to the supporter .

5.Standard Equipment of Machine:
1) Manual Uncoiler 1set
2) Infeed Guide 1set
3) Roll Forming Station 1set
4) Post-cut Equipment 1set
5) Hydraulic Station 1pc
6) PLC Control Console 1pc
7) Product Support Table 2pcs
8) Spare Parts 1box

Sales condiction
 1.Port of Shipment: Shanghai, China.
2.Port of Destination: as per customer's request.
3.Delivery time: 60 days.
4.Terms of Payment: 1) 30% for down payment by T/T; 70% for balance by T/T before shipment.
2) 100% Irrevocable L/C at sight.
5. Shipping Documents:
1) Bill of Lading, one full set; 2) Commercial invoice, triplication, 3) Packing list, triplication.
6. Insurance: covered by the buyer.

Company Profile
G550 Decking Floor Metal Roll Forming Machine
G550 Decking Floor Metal Roll Forming Machine
 

Electric Power Casting Iron Pump

Electric pumps are easy operation, silent and enviroment friendly.

Out put stedable power.

Electric Power Casting Iron Pump,Pump Casting Parts,Electric Cast Iron Pump,Cast Iron Pumps

Bin-Bridge General Machinery Co.,Ltd , https://www.castingpump.com