In the early stages of new car running-in, heavy cargo should not be carried. In the 100 hours of the first phase of the new car run-in, The truck should be operated as follows: 1. Preheat the truck before proceeding, regardless of the season. 2. Perform pre-inspection repairs carefully and thoroughly. 3. Avoid emergency braking, emergency steering, and start slowly. 4. Oil change and lubrication should be earlier than the specified time. 5. Do not operate the engine at high speed without external load. Gantry Straight Line Cutting Machine
In order to manufacture these high-quality machines, we are supported by an ultra-modern infrastructure. This helps us to execute our production in the proper way. Also, our professionals make use of latest methodologies to deliver a range that meets the exact requirement as specified by the clients. In addition to this, owing to our ethical business policies, quality tested products range, and reasonable prices, we have increased the number of our satisfied clients.
Product discribe
It is the high efficency flame cutting equipment that adopted
the CNC cutting system. Multiple equal slots can be cut at one time and be
widely used in steel structure industry
with slat cutting. It is a kind of ideal equipment for steel structure plate
making.
Product features
Multiple guns
straight line cutting at same time, cutting efficiency is high.
Bilateral drive,
high transmission accuracy, operating is stability.
Frame aging
treatment, stable structure and non-defrmation.
Can achieve the
synchronous artificial seat, reduce the labor intensity and reduce the labor fatigue.
Can remote
operation, convenient and efficency, save labour.
Automatic temper
control, safty and efficency.
Product parameters
Type
BLZT-4080(BLDH seires can be equiped
lath)
Input power
AC380/50Hz;AC220V/50Hz
Track gauge(mm)
4035
Effective cutting width(mm)
3300
Machine width(mm)
4300
Track length(mm)
8000
Number of standard cutting torch(set)
2
Number of lath cutting torch (set)
≤10
Minimum wideth of lath
80mm
Lift(mm)
200
Cutting thickness(mm)
Flame: 5~200 Plasma: 1~30(According
to the power supply size)
Cutting speed (mm/min)
Flame: 100~1000 Plasma: 450~5000
Idle speed
0~8000
Drive mode
Bilateral drive
System
Shanghai Jiaoda or Beijing Starfire
Operating accurancy
±0.5mm
Plasma Cnc Machine,Cnc Plasma Cutter,Gantry Straight Line Cnc Cutting Machine,Straight Line Cnc Cutting Machine Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoermachine.com
Driving and operating methods of the new forklift running-in stage