Custom Stickers,Custom Made Stickers,Custom Stickers For Business,Order Custom Stickers Jiangmen Hengyuan Label Technology Co., Ltd , https://www.jmhylabelprinted.com
DMF/DMAC/Ammonia recycle application
DMF/DMAC/Ammonia recycle application
Working principle: The use of solvents (such as water) for the strong absorption of harmful or valuable components (such as DMF or DMAC) in the exhaust gas, to purify the exhaust gas to meet the emission standards, or to recover valuable components, and recycle them after purification by distillation. , or both purification and recycling purposes.
Installed in the ammonia water circulation system line renderings
The ATAGO concentration meter CM-800a is installed on the first circulation loop. The absorption solvent (such as water) in this section comes from the second loop. The solvent has already absorbed the target components in the exhaust gas in the second loop and passed through. When the first cycle loop is further absorbed, the solvent absorption capacity will be reduced. The ATAGO Concentration Meter CM-800a can immediately monitor the target components in the solvent, judge the solvent's absorption ability to the target components, and determine whether to increase the fresh absorption solvent to increase the absorption. effectiveness.
Because the density of the solution and the density of water are basically the same, it is not feasible to measure the density and mass flowmeter in this case. The ATAGO concentration meter CM-800a can effectively and stably measure the concentration of the solution, passing 4-20mA. Analog signals are transmitted remotely to the control room.
In order to be able to simultaneously measure various types of aqueous solution concentrations (dilution) with Brix values, the ATAGO Refractometer can directly display the concentration value on the screen. There are more than 80 special scales to choose from.