Solenoid valve is an industrial equipment controlled by electromagnetism. It is an automatic basic component used to control fluid. It belongs to actuator. Pneumatic solenoid valve is one of them. It blocks or leaks different oil drain holes by controlling the movement of valve body. The oil inlet hole is normally open, and hydraulic oil will enter different oil drain pipes, Then the oil pressure of the pneumatic solenoid valve pushes the piston of the oil cylinder. In this way, the mechanical movement of the whole solenoid valve is controlled by controlling the current of the electromagnet of the pneumatic solenoid valve.
Characteristic Pneumatic Solenoid Valve, Pneumatic Air Solenoid Valve, Electronic Solenoid Air Valve Glove Industry Co.,Ltd. , https://www.gloveind.com
Description:
Black High Strength Steel Hexagon Head Thick Hex Nut
Dimension:
We make all standard sizes and non-standard sizes.
Sample Fee:
Samples of <10 pcs will be free,you need to pay for the shipping fee.
Sample Time:
For standard fasteners,the sample time will be about 2~3 days;
For non-standard fasteners,the sample time will be about 5~7 days.
Lead Time:
For standard fasteners,the lead time will be about 7~10 days;
For non-standard fasteners,the lead time will be about 10~15 days.
Item Details:
Â
It can work normally under vacuum, negative pressure and zero pressure, but its diameter is generally less than 25 mm.
It can also operate under zero pressure difference, vacuum and high pressure, but it has high power and must be installed horizontally.
The upper limit of fluid pressure range is high, which can be installed arbitrarily (need to be customized), but the condition of fluid pressure difference must be met.
Principle editing voice
There is a closed cavity in the pneumatic solenoid valve, and there are through holes in different positions. Each hole of the pneumatic solenoid valve leads to different gas pipes. There is a valve in the middle of the cavity and two electromagnets on both sides. The valve body will be attracted to which side when the magnet coil is electrified;
The pneumatic solenoid valve blocks or leaks different exhaust holes by controlling the movement of the valve body, and the air inlet is normally open. High pressure gas will enter different exhaust pipes, and then push the piston of the cylinder through the air pressure of the pneumatic solenoid valve. In this way, the mechanical movement of the whole solenoid valve is controlled by controlling the current of the electromagnet of the pneumatic solenoid valve.
Operation principle of pneumatic solenoid valve
We said the pneumatic solenoid valve working position (solenoid valve on or off), in fact, refers to the pneumatic solenoid valve spool position.
DIN 6330 Black High Strength Steel Hexagon Head Thick Hex Nut