Precautions for installation of hydraulic cylinder sealing kit
For Komaisu Cylinder Seal Kit,Tightening Cylinder Repair Kit,Kobelco Cylinder Seal Kit,Travel Motor Seal Repair Kit Safe Seal Technology Co., Ltd. , https://www.sprsealkits.com
*No pole adjustment needed, making it user-friendly.
*Portable, cost-effective, durable, and reliable.
*Stable arc, deep welding pool, and aesthetically pleasing weld seams.
*Auto protection against over current and over voltage.
*Can work continuously with stable performance and automatic compensation for voltage fluctuations.
*Ideal for decoration and hardware industries.
Model:
ARC-200
Input Power Voltage Frequency (V, Hz):
AC220 (single phase) ±15%, 50/60
Rated Input Power Capacity (KVA):
7
No-load Voltage (V):
62
Output Current Range (A):
20-200
Rated Output Voltage (V):
28
Duty Cycle (%):(25ºC)
60
No-load Loss (W):
40
Efficiency (%):
85
Power Factor (Cosφ):
0.93
Insulation Class:
F
Weight (KG):
9
Overall Dimension (mm):
365×138×238
Case Protection Degree:
IP21S
Suitable Rod Diameter (mm):
1.6-4.0
1.Before installation, carefully check whether the model and specifications of the sealing kit match the hydraulic cylinder, and whether there is any damage or deformation.
2.Before installing the sealing kit, the interior of the hydraulic cylinder should be cleaned thoroughly and checked for foreign objects, sand particles, and other impurities to avoid affecting the sealing effect.
3.When installing the sealing kit, special tools should be used to avoid using hard metal tools or manual tools to avoid damaging the sealing kit.
4.When installing sealing kits, attention should be paid to the direction and position to ensure that each sealing kit is installed correctly to avoid leakage or poor sealing.
5.When installing the sealing kit, attention should be paid to applying lubricating oil or lubricant to make it easier to install and improve the sealing effect.
6.After installing the sealing kit, pressure testing and running should be carried out to ensure the sealing effect and the normal operation of the hydraulic system.
DC Inverter Arc Welding Equipment Arc-200
Model NO.: ARC-200
Model: Arc200
Accessories: Electrode Holder and Earth Clamp
Component: Mosfet
Mosfet Number: 12PCS 18n50e
Diodes Number: 12PCS D92-02
Capacitor: 4PCS 400V/470UF
Trademark: as required
Transport Package: Carton
Specification: 375x153x232mm
Origin: Shenzhen, China
HS Code: 85153900
Product Features: