One Shot Chocolate Depositing Machine
Usage:
QJJ175 Single Head Chocolate Depositing Machine can both be used for the production of single color, two colors (left and right) and pastes central filling chocolates. These two models have fully automatic functions of moulds pre-heating, depositing, moulds vibrating, cooling, de-moulding and conveying, and adopt PLC control system.
Other chocolate depositing machine models manufactured by our factory:
Models
QJJ150
QJJ175
Two Heads
QJJ510
Single Head
QJJ510
Two Heads
Production Capacity
(Piece of Mould/min)
6-10
6-15
6-15
6-15
Whole Machine Power (kW)
6
23
21
25
Number of Mould
(Piece)
200
330
280
330
Mould Size
(mm)
275×275×30
330×200×30
510×200×30
510×200×30
Machine Weight
(kg)
600
4500
4000
5000
Outside Dimension
(mm)
400×520×150
16000×1000×1800
16000×2000×1600
16000×1200×1800
Models
Production Capacity
(Piece of Mould/min)
(Piece)
(mm)
(kg)
(mm)
One Shot Chocolate Depositing Machine,One Shot Chocolate Machine,One-Shot Chocolate Depositing,One Shot Chocolate Depositor Suzhou Lejoy Machinery Co., Ltd. , https://www.choco-machine.com
Condenser Tube Cleaning Device
Condenser and Concrete tube scaling is one of the most underestimated problems in the industry. It results in decrease of productivity and efficiency of the plant. We handle the two major methods used to fight the scaling. We provide online Condenser Tube Cleaning Systems (CTCS) along with Condenser Cleaning Sponge Balls made from Food Grade-A natural rubber to clean out the scaling. Furthermore, we also provide Offline Bullet Cleaning with our own skilled labor, machines and bronze bullets which can be performed during overhaul and shutdown. For the purpose of tackling similar problems with the Concrete Industry we have our Vulcan Clean-out Balls also made from Food Grade-A natural rubber.
Â
Working Procedures
Â
Â
The cleaning balls are introduced and removed from the system through the ball collector. The collector interior is partitioned by a screen into two areas. When the collector is in the ball collection or retention mode the screen separates the collector inlet and outlet. When the screen is positioned such that the inlet and outlet are no longer separated, the balls are conveyed by the flow to the injection site(s). The balls are injected into the cold leg of the circulating cooling water system serving the condenser or heat exchanger so as to achieve a random distribution within the stream. Because the balls (when deaerated) have nearly the same specific gravity as the cooling water, they follow the same path as the water within which they are suspended.
Â
Ball Collector in the open (recirculation) mode. Both the inlet and outlet of the collector are on the same side of the collector screen.
Ball Collector in the collection (ball capture) mode. The screen has been rotated so as to separate the inlet and outlet of the collector.
Â
When the ball charge is correctly sized, each tube is treated by a ball approximately once every five minutes. When the balls have passed through the tubes and enter the cooling water discharge line they are intercepted by the ball strainer(s). When the balls meet the strainer screen they are driven along the screen surface to the ball extraction port located at the point where the down stream extremity of the screen meets the spool body. The balls are then conveyed by a special pump through the ball collector and once again to the injection site.
4. System Description
4.1. Strainer Section
4.2. Ball Recirculating Unit
4.3. Sponge Rubber Balls
4.4. Ball Injection
4.5. Automatic Operation and Monitoring System
4.5.1. Automatic Operation
4.5.2. Monitoring System
4.6. Material Selection
Â
5. Factors Affecting Ball Circulation
5.1. Coarse Particles (Debris) carried into the Heat Exchangers and Leading to Tube
Blockages
5.2. Dead Spots and Vortexes
5.3. Waterbox and Tube Sheet
5.4. Balls Passing the Tubes
5.5. Balls at Strainer Section
5.6. Ball Recirculating PumpÂ
Â
Characteristics of condenser online cleaning device
Â
1.energy saving,Min 10% and Max 40% ,99%rubber ball could be collected.
2, one-time investment cost could be recovered within one year.
3, automatic on-line cleaning to ensure without fouling, corrosion on the condenser.
4, avoid and eliminate air conditioner engine from abnormal pressure during operation.
5, prolong the service lifespan of compressor and the pipeline.
6, ensure the condenser to be in high heat transfer efficiency.
7,complete physical processing, cost- saving in chemical treatment, environmental protection.
Â
8, full PLC computer programming control, no technicians maintainenance and regulates the frequency of automatic cleaning condenser every day.
Technical parameters
Â
1. Performance: ball collecting rate ≤95%
2. Input voltage: 380V / 50HZ
3. Power: ≤5KW
4. Work environment requirements: Temperature ≤55 ºC, humidity ≤95 ºCRelative
5. Pressure loss: 0.003MPa-0.05MPa
6. Water temperature: ≤50 ºC
7. Working Pressure: ≤1.6MPa.
Â
QJJ330(3+2)
QJJ510(3+2)
QJJ275(3+2)
QJJ1000
6-15
6-15
6-15
6-10
Whole Machine Power (kW)
28
47
61
49
Number of Mould
380
380
410
580
Mould Size
330×200×30
510×200×30
275×175×30
275×175×30
Machine Weight
5300
7000
6500
8200
Outside Dimension
18000×1200×1900
19000×1300×2500
15420×5270×2100
26800×3500×2550
Condenser Brass Tube on-Load Sponge Ball Cleaning System