Competitive Hose Tail Hydraulic Hose Fittings

China factory Hydraulic carbon steel quality fittings 

Material: stainless steel, carbon steel, brass, etc

Connection: Male/Female

Surface Treatment:Trivalent Silver Zinc, Trivalent Yellow Zinc, Hexavalent Yellow Zinc, Chrome Plate, Electric-polish etc.

Application: Automobile, Engineering Machinery, Lathe, Agriculture Machine, Mining, Spurting the Oil Paint, Metallurgy petroleum , Construction, Chemicals, Textile, Ships, Ocean, Military, Recreation, Electronics and so forth.

Note: Special dimension and other standard fittings are available under customer's requirements.

 1. Ferrule and Fittings:

1). BSP male, female fitting, nuts, ferrules

2).JIC  male, female fitting,nut,ferrules

3). NPT  male, female fitting,nut,ferrules

4). American Universal fittings (like Eaton style)

5).American reusable fittings  (like Paker style)

6).Australia NPT,JIC fitting (like Ryco style) 

2. Adaptors:

1). BSP male, female adaptor 2 ways, 3 ways

2).JIC male, female  adaptor 2 ways, 3 ways

3). NPT male, female  adaptor 2 ways, 3 ways

4). American adaptor 2 ways, 3 ways (like Eaton style)

5).American adaptor 2 ways, 3 ways   (like Paker style)

6).Australia adaptor 2 ways, 3 ways (like Ryco style)

 

3.Couplers and clamps: 

European type, American type, Austraulia type camlock, pin-plug and clamps for large size hoses with NPT, BSP thread.

 

Pictures of Hydraulic fittings and ferrules



Any details pls contact us free .

Pre-insulated Pipe Fabrication

Pre-insulated, pre-fabricated jacketed piping system is used for industrial and commercial applications. Pre-Insulated, pre-jacketed thermal pipe has a definite advantage over field installed insulation and jacketing. All straight sections of the factory preinsulated piping system shall be jacketed with a High Density Polyethylene (HDPE) jacket conforming to ASTM D1248,PVC jackets shall not be allowed.

All field butt joints shall be made in straight sections of pipe.here for welding polyethylene, it can use field hdpe pipe Butt Fusion Machines according to pipe range. For PE Pre-insulated pipe fabrication, It will use workshop fitting machines for bend fabrication of plastics. How it works? Firstly you need to prepare pe pipe Angle Cutting Saw and fix thin pipe on sepcial clamp, and then cut hdpe pre-insulated pipe in required angle. Then move this pipe and fix them on elbow clamps of pre-insulated fitting welding equipment. Special half heating plates positioned on top of the welding zone are used to ensure the required welding temperature, The appication of uniform welding pressure which is controlled hydraulically, ensures the quality of the weld between the sleeve and the pipe casing. The welding phases of pipe fabrication are below: 1. Approaching and preheating 2: Heating 3.Removing the heating element 4. Reaching the welding pressure 5.Welding 6. Cooling

Pre-Insulated Pipe Fabrication,Custom Pipe Fabrication,Pipeline Fabrication,Butt Fusion Welding Machine

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.wxpipefusionweldings.com