Commercial Cooling Machine: Dx Type Air Conditioner Blue Aluminum Fin Heat Exchanger

Model NO.: RTU18-260
Mounting: Floor Standing
Lifetime: 15~20 years
Certification: CE
Condition: New
Compressor: Danfoss/Copeland/Panasonic/Daikin
Refrigerant: R410A/R407c/R134A/R22
Cooling Capacity: 10kw-260kw
Gas Burner: Optional
Free Cooling: Optional
Fresh Air: Optional
Proof Explosion: Optional
Roofcurb: Optional
Power Supply: 50Hz/60Hz
Trademark: Amrta or OEM
Transport Package: Plywood Package or Plastic Film Wrapped
Origin: China
HS Code: 8418612090
Model NO.: RTU18-260
Mounting: Floor Standing
Lifetime: 15~20 years
Certification: CE
Condition: New
Compressor: Danfoss/Copeland/Panasonic/Daikin
Refrigerant: R410A/R407c/R134A/R22
Cooling Capacity: 10kw-260kw
Gas Burner: Optional
Free Cooling: Optional
Fresh Air: Optional
Proof Explosion: Optional
Roofcurb: Optional
Power Supply: 50Hz/60Hz
Trademark: Amrta or OEM
Transport Package: Plywood Package or Plastic Film Wrapped
Origin: China
HS Code: 8418612090
Product Description
Characteristics
Structure
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to
atmospheric agents.
Direct expansion coils with condensate drain tray.
Hermetic compressor
High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,
mounted on rubber vibration dampers
Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise
Centrifugal fan
Forward curve centrifugal fans for air treatment section and axial fans for condensation section
Front, side and underside air discharge of the treatment unit
High external pressure, long air supply distance
Electric panel
Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other
necessary protection devices for the main components
Easy operation line controller
Cooling/Heating/Auto
Error indication
Timing on/off
Optional
Economizer with fresh, return air dampers and fresh air hood
Free cooling function for low ambient temperature
Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C
BMS devices
T3 (Tropical climate)
Roof curb
Metal / aluminum filter
Heat recovery to 100%
Evaporating section: double skin with 50mm polyurethane foam
Optional water heating coil
Metal or plastic mesh on condenser coil
Optional supply / return air configurations
Upgraded plug fan
G4 filter, plate and bag filter
Technical Data
Model WRF45ZA WRF50ZA WRF 60ZA WRF72ZA WRF 90ZA WRF105ZA
WF 45ZA WF 50ZA WF 60ZA WF 72ZA WF90ZA WF 105ZA
Cooling capacity kW 44.5 50 60 70 90 105
Heating capacity kW 48.7 54.3 64 75.4 96.2 113.2
Power supply   380V / 3Ph / 50HZA
Cooling power input kW 17 19.5 22.8 26.7 32.9 39.7
Heating power input kW 15.6 18 21 24.8 30.4 36.7
Start current A 168 186 175 199 197 266
Working current in cooling A 31.7 35.6 39.9 48.3 61 70.6
Working current in heating A 29.9 33.5 37.5 45.4 57.3 66.3
Throttle methods Thermal expansion valve
Circuits 2 2 2 2 3 3
Refrigerant R410A
Comp. Type Scroll type        380V / 3Ph / 50HZA
Qty 2 2 2 2 3 3
Condensor side
Condensor Type Al+copper tube
Axial fan Qty 1 1 1 1 2 2
Drive Direct drive
Motor power kW 0.25 0.37 0.37 0.55 0.75 0.75
Air flow m3 /h 4600 7800 7800 9000 12600 12600
Evaporator side
Evaporator Type Al+copper tube
Centrifugal fan Qty 1 1 1 1 1 1
Motor power kW 3 3 4 4 5.5 5.5
Air flow m3 /h 7600 8500 10900 12500 16000 19500
Drive Direct drive Belt drive
External static pressure(Pa) 250 250 300 300 300 300
Filter Aliuminum frame filter G3
Noise level dB(A) 73 73 73 75 74 75
Dimension L mm 2268 2268 2298 2298 2878 2878
W mm 1440 1440 1650 1650 2140 2270
H mm 1167 1167 1400 1400 1964 1964
Weight kg 750 770 830 860 1160 1350
Commercial Cooling Machine: Dx Type Air Conditioner Blue Aluminum Fin Heat Exchanger
Commercial Cooling Machine: Dx Type Air Conditioner Blue Aluminum Fin Heat Exchanger

  Product Description
Characteristics
Structure
Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to
atmospheric agents.
Direct expansion coils with condensate drain tray.
Hermetic compressor
High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater,
mounted on rubber vibration dampers
Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise
Centrifugal fan
Forward curve centrifugal fans for air treatment section and axial fans for condensation section
Front, side and underside air discharge of the treatment unit
High external pressure, long air supply distance
Electric panel
Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other
necessary protection devices for the main components
Easy operation line controller
Cooling/Heating/Auto
Error indication
Timing on/off
Optional
Economizer with fresh, return air dampers and fresh air hood
Free cooling function for low ambient temperature
Low ambient control device for operation of outdoor units at ambient temperatures from less than 20°C down to -10°C
BMS devices
T3 (Tropical climate)
Roof curb
Metal / aluminum filter
Heat recovery to 100%
Evaporating section: double skin with 50mm polyurethane foam
Optional water heating coil
Metal or plastic mesh on condenser coil
Optional supply / return air configurations
Upgraded plug fan
G4 filter, plate and bag filter
Technical Data
Model WRF45ZA WRF50ZA WRF 60ZA WRF72ZA WRF 90ZA WRF105ZA
WF 45ZA WF 50ZA WF 60ZA WF 72ZA WF90ZA WF 105ZA
Cooling capacity kW 44.5 50 60 70 90 105
Heating capacity kW 48.7 54.3 64 75.4 96.2 113.2
Power supply   380V / 3Ph / 50HZA
Cooling power input kW 17 19.5 22.8 26.7 32.9 39.7
Heating power input kW 15.6 18 21 24.8 30.4 36.7
Start current A 168 186 175 199 197 266
Working current in cooling A 31.7 35.6 39.9 48.3 61 70.6
Working current in heating A 29.9 33.5 37.5 45.4 57.3 66.3
Throttle methods Thermal expansion valve
Circuits 2 2 2 2 3 3
Refrigerant R410A
Comp. Type Scroll type        380V / 3Ph / 50HZA
Qty 2 2 2 2 3 3
Condensor side
Condensor Type Al+copper tube
Axial fan Qty 1 1 1 1 2 2
Drive Direct drive
Motor power kW 0.25 0.37 0.37 0.55 0.75 0.75
Air flow m3 /h 4600 7800 7800 9000 12600 12600
Evaporator side
Evaporator Type Al+copper tube
Centrifugal fan Qty 1 1 1 1 1 1
Motor power kW 3 3 4 4 5.5 5.5
Air flow m3 /h 7600 8500 10900 12500 16000 19500
Drive Direct drive Belt drive
External static pressure(Pa) 250 250 300 300 300 300
Filter Aliuminum frame filter G3
Noise level dB(A) 73 73 73 75 74 75
Dimension L mm 2268 2268 2298 2298 2878 2878
W mm 1440 1440 1650 1650 2140 2270
H mm 1167 1167 1400 1400 1964 1964
Weight kg 750 770 830 860 1160 1350
Commercial Cooling Machine: Dx Type Air Conditioner Blue Aluminum Fin Heat Exchanger
Commercial Cooling Machine: Dx Type Air Conditioner Blue Aluminum Fin Heat Exchanger

 

The Ceramic Nozzle has different types ,the long ceramic nozzle ,the extra long ceramic nozzle ,the large dia. Ceramic nozzle ,and also the common ceramic nozzle .When the current pass through is greater ,the tig torch need the longer ceramic nozzle ,also the larger ceramic nozzle .We have several series of the ceramic nozzle ,the 13N ,the 10N ,the 54N,the 57N,the 14N,the 53N ,and so on ,they are suit for the tig torches .The custom can choice based on the tig torches they used .

Ceramic Nozzle

Ceramic Nozzle, Tig Welding Ceramic Nozzles, 10N Ceramic Nozzle, 13N Ceramic Nozzle, 14N Ceramic Nozzle

EDAWELD COMPANY LIMITED , http://www.jsedaweld.com