Automatic Feeding Both Side Cloth Cutting Machine

Automatic feeding both side cutting machine

USE AND CHARACTERS:
The machine is applicable to such cutting knife mold found objects: Leather, plastic, fabric, purses, toys, hats, foaming tablets, floor materials and soft cloth strips with a variety of needs. 
Features are as follows: 
1. Adopting Double oil cylinder, four-post oriented and Automatic balance link structure, which can guarantee the absolutely same cutting depth of each cutting position. 
2. Automatic lubrication system, simple operation, low failure rate, strong impact force and extend the service life of the machine. 
3. When pressing the cutting board and touching the cutter, it can cut automatically slowly to make that no size error between the layer and lowermost layer of the cutting material. 
4. The special setting structure is equipped to assort with the cutter and cutting height to make the adjustment of stroke be simple and accurate. 
5. Device of double sides auto-feeding worktable, control the feeding worktable advance and retreat, and be suitable for cutting two cutting dies of different height at the same time, feeding accurate and smooth. 
6. Operation with two hands makes high safety. 
7. Special sizes can be customized to the production, in order to meet the needs of different users.
 
Technology specification :
 

Maximum momentum
1000kN

Seissor speed
0.08m/s

Stroke adjustment
0-140mm

Range between the working tables
50-190mm

Size of the upper pressing board
1600×800mm

Size of the pressing board
1600×820mm

Motor power
7.8kW

Voltage
as optional  

Automtaic grade
automatic  

Drive
hydraulic  

hydraulic oil
46# or 68#  

Machine color
as optional  

Overall dimension
2520×1400×1750mm

Net weight
4800kgs

Gross weight
5000kgs  

 
Application:
      The leather cutting machine is mainly suitable for cut one layer or multi-layer of leather, rubber, plastic, hard papers, fiber, chemical fiber, non-woven and so on.
 
Advantages:
1. The machine use the travelling cutting board frame, that is very firm and easy operation.
2. The cutting point setting is simple and efficient.
3. The machine is controlled by PLC , it has high working efficiency .The motion cutting can 4. move automatically, that raise work efficiency.
5. The machine may add concerning unit, that saves labour.
6. Using differential oil way, cut is rapid and easy.
7. The lifting position of pressing board can be freely set to reduce idle travel and enhance work efficiency.
8. The movement of cutting head is controlled by automatic speed variation to realize flexible movement with high speed and accurate positioning and without impact.
9. The hydraulic system specially designed is featured by low noise and low oil consumption.
10. Products of special specifications can be customized. is available  for selection. 
Â